October 2007

AlliedView-EMS 3.9.1: Device Pack for Full Installation
 

This file contains important information about AlliedView-EMS 3.9.1.
The topics discussed in this file are summarized in the Contents
section.  


Contents
========

   A. What's New?
   B. Device Pack Installation


A. What's New?
==============

This section describes the updates that the Device Pack will apply to
AlliedView-EMS 3.9 installations.

1. Device Manager
-----------------

 * Adds support for the following additional devices:
 
        AT-AR770S       Secure VPN Router
        AT-9424Ts       Layer 3 Gigabit Ethernet Switch
        AT-9448T/XP     Layer 3 Gigabit Ethernet Switch
        Rapier 16Fi/MT  Layer 3 Fast Ethernet Switch
        AT-x900-24XS    Advanced Gigabit Layer 3+ Expandable Switch
        AT-x900-24XT-N  Advanced Gigabit Layer 3+ Expandable Switch
        

 * Updates modules to support the latest management software and MIB
   objects for the following devices:
        AT-9408LC/SP    Layer 2+ Gigabit Ethernet Switch
        AT-9424T/GB     Layer 2+ Gigabit Ethernet Switch
        AT-9424T/SP     Layer 2+ Gigabit Ethernet Switch
        AT-9424Ts/XP    Layer 3 Gigabit Ethernet Switch
        AT-9448Ts/XP    Layer 3 Gigabit Ethernet Switch
        AT-AR750S       Secure VPN Router
        AT-AR750S-DP    Secure VPN Router
        AT-CV1200       2-Slot Converteon Chassis
        AT-CV5000       18-Slot Converteon Chassis
        AT-x900-24XT    Advanced Gigabit Layer 3+ Expandable Switch

2. QoS Manager
--------------

 * Fixes the following known issues:

   a. AT-9900: The Add and Modify buttons for Flow Groups and
      Classifiers would no longer function whenever the Destination
      L4 Mask classifier property was configured. (JIRA Key: ATPE-
      121)

   b. AT-9900: QoS Manager could not configure the Inner Tag Protocol
      ID classifier property on the device. (JIRA Key: ATPE-122)

   c. AT-9900: The VLAN Priority and Inner VLAN Priority classifier
      properties did not contain a zero (0) option in their dropdown
      lists. (JIRA Key: ATPE-123)

   d. When the TCP Flags classifier property was set to multiple
      values, QoS Manager could not display those values correctly
      after they were applied to the device. This issue was
      encountered with the following devices (JIRA Key: ATPE-124):
         * AT-8600 Series
         * AT-8800 Series
         * AT-9900 Series
         * Rapier 24i

   e. AT-9900: Clicking on the Add/Modify button in the Flow Groups,
      Traffic Classes or Policies tabs would automatically add a
      "none" option as well as a blank value option to the Port
      Assignment property in Quick Setup.  These options would also
      appear as ports in the Ports tab.  (JIRA Key: ATPE-125)


B. Device Pack Installation
===========================

AlliedView-EMS 3.9 (Application and/or Documentation) must already be
installed before an attempt is made to apply the Device Pack.  If you
have previously integrated AlliedView-EMS 3.9 with a network
management system (NMS), the following pre-installation conditions
must be met:

*  For Castle Rock SNMPc and HP OpenView, the SNMPc or
   OpenView service must not be running.
*  For Tivoli NetView, the NetView service must not be running.
*  For IpSwitch WhatsUp, the WhatsUp Engine service must not be
   running but the WhatsUp SQL services must be running.

Windows
-------
1. Make sure that you have administrator privileges.
2. Make sure that AV-EMS applications are not running.
3. Run EMS391.exe by double-clicking the file.

Solaris
-------
1. Make sure that you have root privileges.
2. Make sure that AV-EMS applications are not running. 
3. Copy the EMS391S.bin file to a temporary directory.
4. Move to the directory where the device pack installation file is.  
5. Make sure that the installation file is executable.  Use chmod
   command to correct the permission mode of the file.

   chmod u+x EMS391S.bin

6. Enter the following on the command line:

   ./EMS391S.bin

HP-UX
-----
1. Make sure that you have root privileges.
2. Make sure that AV-EMS applications are not running. 
3. Copy the EMS391H.bin file to a temporary directory.
4. Move to the directory where the installation file is.  
5. Make sure that the installation file is executable.  Use the chmod
   command to correct the permissions mode of the file.

   chmod u+x EMS391H.bin

6. Enter the following on the command line:

   ./EMS391H.bin

---------------------------------------------------------------------
AlliedView-EMS is a product of Allied Telesis K.K.
Visit us at http://www.alliedtelesis.com.

Copyright (C) 2007 by Allied Telesis K.K. 
All rights reserved.

PN 613-000840 Rev A