November 2007

AlliedView-UM v1.7 SP1


This file contains important information about AlliedView-UM SP1.  The topics
discussed in this file are summarized in the Contents section.


Contents
========

   A. Resolved Issue
   B. Service Pack Installation


A. Resolved Issue
=================

AlliedView-UM 1.7 SP1 resolves an issue relating to the device detection
routines for non-AlliedWare devices.  Non-AlliedWare devices could not be added
or detected if an SNMP read community was not supplied.  Furthermore,
AlliedView-UM could not add non-AlliedWare devices if the SNMP read community
was a value other than "public". (JIRA Key: ATPE-128)

With this Service Pack, AlliedView-UM will no longer use SNMP in its device
detection routines for non-AlliedWare devices.  The SNMP Read Community, Timeout
and Retries fields will be ignored for non-AlliedWare devices.


B. Service Pack Installation
============================

AlliedView-UM 1.7 must already be installed before an attempt is made to apply
the service pack.

Windows
-------
1. Make sure that you have administrator privileges and that AlliedView-UM 1.7
   is not running.
2. Using Windows Explorer, navigate to the folder where AlliedView-UM 1.7 is
   installed.  If you installed AlliedView-UM 1.7 using the default directory,
   the AlliedView-UM folder will be located in C:\Program Files\Allied Telesis.
3. From the AlliedView-UM folder, go to the \lib folder.
4. Disable the "Read-only" attribute of the "atum.jar" file.
      * Right click on the "atum.jar" file and select "Properties".
      * Uncheck the "Read-only" attribute.
      * Click on the "OK" button.
5. Run AVUM171.exe by double clicking the file.
6. Extract the file from the archive to the \lib folder.  This will replace the
   current "atum.jar" file with the new one.


Solaris 
-------
1. Make sure that you have administrator privileges and that AlliedView-UM 1.7
   is not running.
2. Using a terminal window, navigate to the folder where AlliedView-UM 1.7 is
   installed.  If you installed AlliedView-UM 1.7 using the default directory,
   the AlliedView-UM folder will be located in /opt/AlliedTelesis.
3. From the AlliedView-UM folder, go to the /lib folder.
4. Copy the AVUM171S.tar file into this folder.
5. Extract the file from the archive using the tar command:
   
        tar -xvf AVUM171S.tar
        
   This will replace the current "atum.jar" file with the new one.


HP-UX
-----
1. Make sure that you have administrator privileges and that AlliedView-UM 1.7
   is not running.
2. Using a terminal window, navigate to the folder where AlliedView-UM 1.7 is
   installed.  If you installed AlliedView-UM 1.7 using the default directory,
   the AlliedView-UM folder will be located in /opt/AlliedTelesis.
3. From the AlliedView-UM folder, go to the /lib folder.
4. Copy the AVUM171S.tar file into this folder.
5. Extract the file from the archive using the tar command:
   
        tar -xvf AVUM171H.tar
        
   This will replace the current "atum.jar" file with the new one.

--------------------------------------------------------------------------------
Copyright (C) 2007 by Allied Telesis K.K. 
All rights reserved.

PN 613-000896 Rev A