======================================================================
Diamond Viper V330 Series BIOS Version 1.62 and 1.62TV
======================================================================

Release Notes
------------------
This is BIOS version 1.62 for Viper V330 (4MB version only).  Install version 1.62
if your Viper V330 has only one connector (monitor connector) on it's bracket. 
Install version 1.62TV if your Viper V330 has 3 connectors (monitor, RCA, and S-Video--
for TV Output).  

If the 1.62 BIOS is installed on a board with TV-Out connectors, then TV Output will
be disabled because the two boards use different timings.  However, this problem can
be easily reversed by installing the correct BIOS (version 1.62TV).  Simply follow 
the instructions below.


Installation Instructions
-------------------------
1) Double click on the executable file "FLASH162.EXE" or "FLASH162TV.EXE"

2) Choose "Save to Disk"

3) When the the Winzip dialog box appears, click "Unzip"
   - All files will now be copied to your floppy disk in drive "A"
   - (where "A" is the letter of your floppy drive)

4) Reboot and boot off a: disk to re-flash bios


Issues Addressed and Features Added
-----------------------------------
General timing issues


=======================================================================
Diamond Multimedia Systems, Inc.       (c) 1993-97, All Rights Reserved
=======================================================================