******************************************************************************
*   SiS540 VGA/Utility Driver Setup & Usage Procedures                       *
*     for Microsoft NT 4.0                                                   *
******************************************************************************

# Windows NT 4.0 display drivers Installation:
1. Click "Start" menu and select Control Panel from Settings group.
2. Select Display icon.
3. Select Settings of Display Properties.
4. Select Display Type.
5. Select Change from the Adapter Type area.
6. Select Have Diskof Change Display.
7. Place the SiS540 CD-Title Disk into CDROM Drive.
8. When the "Install from Disk" dialog box appears, type the directory
   storing the drivers and click "OK".
   The directory in CD-Title is at "D:\WINNT40".
   The directory in diskette package is "A:\WINNT40" at Disk#1		
9. When the "Change Display" dialog box appears, click "OK".
10.When the "Third-party Drivers" dialog box appears, click "Yes".

  A message will appear stating that the drivers were successfully installed.
  Click "OK".  You must now restart Windows NT 4.0.

# Selecting resolution and color depth:
1. Click "Start" menu and select Control Panel from Settings group.
2. Select Display icon.
3. Select Settings.
4. Select Color Palette to change between 16 colors,256 colors,32768 colors,
   65536 colors, and 16777216 colors.
5. To select desktop resolution size, go to the Desktop area and use the
   slide bar to change resolution from 640x480,800x600,1024x768 to 1280x1024.
6. Select Test to test the resolution. If the display test screen was good
   then select "Yes" when the "Testing Mode" dialog box appears. If the
   display test screen was bad then select "No".  Windows NT will give you an
   error message.
7. Click "OK".  If the display test screen was good and you select "Yes",
   Windows NT 4.0 will change the mode without restarting Windows NT 4.0.