************************************************************
************************************************************
*
*  Intel(R) 810 Chipset Driver for Windows* NT4.0
*  Installation Readme                                                                            
*
*  NOTE:  This document refers to systems containing the 
*         following Intel chipset: 
*               
*         	Intel(R) 810 Chipset
*
*  Date:  May 13, 1999       
*                  
*  This document makes references to products developed by 
*  Intel. There are some restrictions on how these products 
*  may be used and what information may be disclosed to 
*  others. Please read the Disclaimer section at the bottom 
*  of this document, and contact your Intel field 
*  representative if you would like more information. 
*
*
************************************************************
************************************************************

************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:

1.  System Requirements
2.  Localized Language Abbreviations
3.  Installing the Software
4.  Verifying Installation of the Software
5.  De-installing the Software
6.  Identifying the Software Version Number

************************************************************
* 1. SYSTEM REQUIREMENTS
************************************************************
1.  The system must contain one of the following Intel
    chipsets:

          Intel(R) 810 Chipset GMCH A-2
      
2.  64 MB of system memory is required to install this driver.

3.  There should be sufficient hard disk space in the <TEMP>
    directory (typically C:\TEMP) on the system to install
    this software.

    The Windows NT INF files included with this distribution 
    package are designed to function with the following
    versions of Windows NT:
        
       Microsoft* Windows NT 4.0 4.00.1381 (with Service Pak 4)
        
Please check with your system provider to determine the
operating system and Intel chipset used in your system.

************************************************************
* 2.  LOCALIZED LANGUAGE ABBREVIATIONS
************************************************************

The following list is the abbreviations of all languages that
the driver has been localized in. You may have to refer to
this section while using this document.

ptb -> Brazilian Portuguese
dan -> Danish
nld -> Dutch
eng -> English
fin -> Finnish
fra -> French
frc -> French Canadian
deu -> German
ita -> Italian
enu -> International English
jpn -> Japanese
kor -> Korean
chs -> Mainland Chinese
plk -> Polish
ptg -> Portuguese
cht -> Traditional Chinese
nor -> Norwegian
rus -> Russian
esn -> Spanish
esm -> Spanish Mexican
sve -> Swedish
tha -> Thai
esp -> Traditional Spanish

************************************************************
* 3. INSTALLING THE SOFTWARE
************************************************************

General Installation Notes:

1.  The operating system must be installed prior to the
    installation of the driver. 

2.  This installation procedure is specific only to the
    version of driver and installation file included in this
    release. 
 
3.  You can choose six different methods of installation for 
    this release. The file you need to download for each are 
    indicated in the appropriate section.

        1) InstallShield* (automated) install from hard drive
	   See Section 3.1.
        2) InstallShield (automated) install from CD-ROM
	   See Section 3.1.
        3) InstallShield (automated) install from floppy disk
	   See Section 3.2.
	4) Manual Install from hard drive
	   See Section 3.3.
	5) Manual Install from CD-ROM
	   See Section 3.3.
	6) Manual Install from floppy disk
	   See Section 3.4.


3.1  INSTALLSHIELD (AUTOMATED) INSTALL FROM CD-ROM or HARD DRIVE

1.  Download WINNT4CD.ZIP from the web. Double-click to
    unzip (you must have WinZip* installed; download from
    www.winzip.com). Hit the Extract button and indicate the
    directory into which the files are to be extracted. Hit the
    Extract button to unzip the files to that directory.

2.  At this point you have two intall options:

    If you wish to install from a CD, copy the entire contents,
    including subdirectories, of the directory where you unzipped 
    the WINNT4CD.ZIP file. Insert the CD-ROM into the drive. If
    autorun is enabled, the installer will begin automatically. 
    Otherwise, enter the graphics directory on the CD-ROM and
    double-click SETUP.EXE.

    If you wish to install from the hard drive, enter the
    directory into which you unzipped the WINNT4CD.ZIP file.
    Enter the graphics subdirectory and doublclick SETUP.EXE.

3.  Click "Next" on the Welcome screen.

4.  Read the license agreement and click "Yes" to continue.

5.  This screen indicates the directory in which the End-User
    Diagnostic Utility files will be stored.
    NOTE: The graphics driver is not installed here. (It is
    installed in the appropriate Windows system directories.)
    Only the EUD utility files are installed here. If you wish
    to change the directory in which the EUD will be stored,
    click "Browse" and change the directory. Click "Next" to
    continue.

6.  The driver files will now be installed. When the install
    finishes, choose the "Yes" to reboot option, and click
    "Finish" to restart your computer. The driver should
    now be loaded. To determine if the driver has been loaded
    correctly, refer to the "Verifying Installation" section
    below.


3.2  INSTALLSHIELD (AUTOMATED) INSTALL FROM FLOPPY DISK

1.  Download the specific localized version WINNTXXX.ZIP
    from the web. (THE LAST THREE CHARACTER PLACES ARE
    THE LOCALIZED LANGUAGES AVAILABLE.) Refer to section 2
    for Localized Language Abbreviations. Unzip and copy
    the files to multiple floppy disks.

2.  Insert floppy 1 into the disk drive. Go to the floppy
    directory and double-click on setup.exe.

3.  Click "Next" on the introduction screen.

4.  Read the license agreement and click "Yes" to continue.

5.  This screen indicates the directory in which the End-User
    Diagnostic files will be stored. If you wish to change this
    directory, click "Browse" and change the directory. Click
    "Next" to continue.

6.  The driver files will be copied from the floppy. Insert 
    the remaining floppies as directed and click "OK". 

7.  When finished, click "Yes" to restart your computer. (Make
    sure to remove the floppy disk.) The driver should now be 
    loaded. To determine if the driver has been loaded correctly, 
    refer to the Verifying Installation section below.


3.3 MANUAL INSTALL FROM CD-ROM OR HARD DRIVE

1.  Download WINNT4CD.ZIP from the Web. Double-click to unzip. 
    (You must have WinZip installed; download it from www.winzip.com.)
    Hit the Extract button and indicate the directory into which
    the files are to be extracted. Hit the Extract button
    to unzip the files to that directory. If you wish to install
    from the CD-ROM, then the files must be transferred to a CD.

2.  Select the My Computer icon, Control Panel icon, and 
    then the Display icon.

3.  Select the Settings tab, and then click the Display Type 
    button.

4.  Press the Change button in the Adapter Type section of 
    the window, and then click the Have Disk button.

5.  Press the Browse button and go to the Graphics 
    folder on the CD or the hard drive. Select the WinNT4 
    folder. To install the English version of the driver, select
    the i81xNT4.INF file. For additional languages,
    enter the Inf folder and choose the appropriate language. 

6.  A new window, Install from Disk, should appear. Click "OK".

7.  Another window, Change Display, should open, listing the 
    available display types. Choose Intel Corporation 810 
    Graphics Controller Hub and press OK. 

8.  Click "Next". The driver should install. Click Finish when 
    done.

9.  Close all open windows and click "Yes" to reboot. The 
    driver should now be loaded. To determine if the driver has 
    been loaded correctly, refer to the Verifying Installation 
    section below.


3.4 MANUAL INSTALL FROM FLOPPY DISK

=================================================================
Note:  Be sure that the content of each disk is transferred to
the root directory of the floppy. The appropriate files may not 
be found if they are moved to other subdirectories.   
=================================================================

1.  The floppy disk install is broken down by language, so
    you need to download the correct file from the web for
    the driver language needed. File names are in the format
    "WinNT4xxx," where xxx is the three-letter abbreviation
    of the desired language. (See Section 2, Localized
    Language Abbreviations.)

2.  Once you have downloaded the correct file from the web, 
    double-click to unzip. (You must have WinZip installed;
    download it from www.winzip.com). Hit the Extract button
    and indicate the directory into which the files are to
    be extracted. Hit the Extract button to unzip the files
    to that directory.

3.  The files will unzip into multiple subdirectories labeled 
    accordingly. Copy the contents of these directories to
    their corresponding floppy disks.

4.  Select the My Computer icon, the Control Panel icon, and 
    then the Display icon.

5.  Select the Settings tab, and then click the Display Type 
    button.

6.  Press the Change button in the Adapter Type section of the 
    window. Then click the Have Disk button.

7.  The Change Display window should open, listing the 
    available display types. Choose "Intel Corporation 810 
    Graphics Controller Hub" and press "OK".  

8.  Insert Disk 4 and press "OK". Follow the prompts for 
    additional floppy disks, as needed. 

9.  After all appropriate files are transferred,the driver 
    should be installed. Click "Finish" when done.

10. Close all open windows and click "Yes" to reboot. The 
    driver should now be loaded. To determine if the driver 
    has been loaded correctly, refer to the Verifying 
    Installation section below.

************************************************************
* 4. VERIFYING THE INSTALLATION OF THE SOFTWARE
************************************************************

1.  Select the My Computer icon, the Control Panel icon, and 
    then the Display icon.

2.  You should now be in the Display Properties window. 
    Select the Settings tab, and click on the Display Type 
    button. 

3.  You should be in the Display Type window. The 
    appropriate version number should be listed. If not,
    then a different driver is being used.

************************************************************
* 5.  DE-INSTALLING THE SOFTWARE
************************************************************
Note that this procedure assumes that the above installation 
process was successful.

This de-installation procedure is specific only to the 
version of the driver and installation file included in this 
package. 

1.  From the Windows NT desktop, click on My Computer, 
    Control Panel, and then Display.

2.  You should be in the Display Properties window. Click 
    on the Settings tab and then the Display Type button. 

3.  The Display Type page should appear. Now select the 
    Change... button. 

4.  The Change Display page appears. In the split window 
    under "Manufacturers", select "Standard display type". In 
    the other window, select "VGA compatible display adapter". 
    Now select "OK". 

5.  The Files Needed screen should appear. If needed, 
    point to the NT install CD-ROM location and 
    click "OK". 

6.  The Installing Drivers page should appear, stating that, 
    "The drivers were successfully installed." Click "OK".
    Click "Close" on the Display Driver screen, and then
    "Close" in Display Properties.

7.  When prompted, reboot the system as directed, in order
    for the changes to take effect.

************************************************************
* 6.  IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************
1.  Select the My Computer icon, the Control Panel icon, and 
    then the Display icon.

2.  You should now be in the Display Properties window. 
    Select the Settings tab, and click on the Display Type 
    button. 

3.  You should be in the Display Type window. The 
    appropriate version number should be listed. If not,
    then a different driver is being used.

************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
*   (OEM/IHV Distribution & Single User)
************************************************************
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. 
Do not use or load this software and any associated
materials (collectively, the "Software") until you have
carefully read the following terms and conditions. By
loading or using the Software, you agree to the terms of
this Agreement. If you do not wish to so agree, do not
install or use the Software.

Please Also Note:
* If you are an Original Equipment Manufacturer (OEM) or
  Independent Hardware Vendor (IHV), this complete LICENSE
  AGREEMENT applies;
* If you are an End-User, then only Exhibit A, the INTEL
  SOFTWARE LICENSE AGREEMENT, applies.

---------------------------------------------------------
For OEMs and IHVs:

LICENSE.  Subject to the terms of this Agreement, Intel
grants to You a nonexclusive, nontransferable, worldwide,
fully paid-up license under Intel's copyrights to:
  a) use and copy Software internally for Your own
     development and maintenance purposes; and
  b) copy and distribute Software, including derivative
     works of the Software, to Your end-users, but only
     under a license agreement with terms at least as
     restrictive as those contained in Intel's Final,
     Single-User License Agreement, attached as Exhibit A;
     and
  c) modify, copy and distribute the end-user documentation
     that may accompany the Software, but only in
     association with the Software.
If You are not the final manufacturer or vendor of a
computer system or software program incorporating the
Software, then You may transfer a copy of the Software,
including derivative works of the Software (and related
end-user documentation), to Your recipient for use in
accordance with the terms of this Agreement, provided such
recipient agrees to be fully bound by the terms hereof. You
shall not otherwise assign, sublicense, lease or in any
other way transfer or disclose Software to any third party.
You shall not reverse-compile, disassemble or otherwise
reverse-engineer the Software.

Except as expressly stated in this Agreement, no license or
right is granted to You directly or by implication,
inducement, estoppel or otherwise. Intel shall have the
right to inspect or have an independent auditor inspect
Your relevant records to verify Your compliance with the
terms and conditions of this Agreement.

CONFIDENTIALITY.  If You wish to have a third-party
consultant or subcontractor ("Contractor") perform work on
Your behalf that involves access to or use of Software,
You shall obtain a written confidentiality agreement from
the Contractor that contains terms and obligations with
respect to access to or use of Software no less restrictive
than those set forth in this Agreement and excluding any
distribution rights, and use for any other purpose.
Otherwise, You shall not disclose the terms or existence of
this Agreement or use Intel's name in any publications,
advertisements or other announcements without Intel's
prior written consent. You do not have any rights to use
any Intel trademarks or logos.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS.  Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and by international
treaty provisions. You may not remove any copyright notices
from the Software. Intel may make changes to the Software,
or to items referenced therein, at any time without notice,
but is not obligated to support or update the Software.
Except as otherwise expressly provided, Intel grants no
express or implied right under Intel patents, copyrights,
trademarks or other intellectual property rights. You may
transfer the Software only if the recipient agrees to be
fully bound by these terms and if you retain no copies of
the Software.

LIMITED MEDIA WARRANTY.  If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material, physical defects for a period of ninety
days after delivery by Intel. If such a defect is found,
return the media to Intel for replacement or alternate
delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE.  Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items
contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) RESULTING FROM THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 

TERMINATION OF THIS AGREEMENT.  Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
 
APPLICABLE LAWS.  Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS.  The Software is provided
with "RESTRICTED RIGHTS." Use, duplication or disclosure
by the Government is subject to restrictions as set forth
in FAR52.227-14 and DFAR252.227-7013 et seq. or its
successor. Use of the Software by the Government
constitutes acknowledgment of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052.

---------------------------------------------------------
EXHIBIT "A"
INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. 
Do not use or load this software and any associated
materials (collectively, the "Software") until you have
carefully read the following terms and conditions. By
loading or using the Software, you agree to the terms of
this Agreement. If you do not wish to so agree, do not
install or use the Software.

LICENSE.  You may copy the Software onto a single computer
for your personal, non-commercial use, and you may make one
back-up copy of the Software, subject to these conditions: 
1. You may not copy, modify, rent, sell, distribute or
   transfer any part of the Software except as provided in
   this Agreement, and you agree to prevent unauthorized
   copying of the Software.
2. You may not reverse-engineer, decompile or disassemble
   the Software. 
3. You may not sublicense or permit simultaneous use of the
   Software by more than one user.
4. The Software may contain the software or other property
   of third-party suppliers, some of which may be identified
   in, and licensed in accordance with, any enclosed
   "license.txt" file or other text or file. 

OWNERSHIP OF SOFTWARE AND COPYRIGHTS.  Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and international treaty
provisions. You may not remove any copyright notices from
the Software. Intel may make changes to the Software, or to
items referenced therein, at any time without notice, but
is not obligated to support or update the Software. Except
as otherwise expressly provided, Intel grants no express or
implied right under Intel patents, copyrights, trademarks
or other intellectual property rights. You may transfer the
Software only if the recipient agrees to be fully bound by
these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY.  If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material, physical defects for a period of ninety
days after delivery by Intel. If such a defect is found,
return the media to Intel for replacement or alternate
delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE.  Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items contained
within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) RESULTING FROM THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 

TERMINATION OF THIS AGREEMENT.  Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
 
APPLICABLE LAWS.  Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS.  The Software is provided
with "RESTRICTED RIGHTS." Use, duplication or disclosure
by the Government is subject to restrictions as set forth
in FAR52.227-14 and DFAR252.227-7013 et seq. or its
successor. Use of the Software by the Government
constitutes acknowledgment of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052.
 
SLAOEMIHV/RBK/November 4, 1998
************************************************************

************************************************************
* DISCLAIMER
************************************************************
Intel is making no claims of usability, efficacy or warranty.
The INTEL SOFTWARE LICENSE AGREEMENT contained herein
completely defines the license and use of this software.
************************************************************
Information in this document is provided in connection with
Intel products. Except as expressly stated in the INTEL
SOFTWARE LICENSE AGREEMENT contained herein, no license,
express or implied, by estoppel or otherwise, to any
intellectual property rights is granted by this document.
Except as provided in Intel's Terms and Conditions of Sale
for such products, Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products, including
liability or warranties relating to fitness for a particular
purpose, merchantability or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, lifesaving,
or life-sustaining applications.

************************************************************
* Intel Corporation disclaims all warranties and liabilities
* for the use of this document, the software and the
* information contained herein, and assumes no
* responsibility for any errors which may appear in this
* document or the software, nor does Intel make a commitment
* to update the information or software contained herein.
* Intel reserves the right to make changes to this document
* or software at any time, without notice.
************************************************************

* Third-party brands and names are the property of their
  respective owners.

Copyright (c) Intel Corporation, 1998-1999