PowerWave32 Pro Installation Notes

Date: 06/01/95

--------------------------------------------------------------------------------------------------------------------------------
Troubleshooting Information
--------------------------------------------------------------------------------------------------------------------------------
For troubleshooting assistance, please send mails to X-Tech's e-mail 
service address at amor@hntp2.hinet.net  
                   ^^^^^^^^^^^^^^^^^^^^
This service requires that you have access to a Internet account though 
your Modom.

--------------------------------------------------------------------------------------------------------------------------------
            !!! IMPORTANT !!!

>>>  Tips for Successful Installation  <<<
--------------------------------------------------------------------------------------------------------------------------------
If you are using the PCI main board to install PowerWave32 Pro card.  
Please make notice on this information below.

Some older DOS programs (usually games) will not let you specify an 
alternate MIDI IRQ.  They assume an IRQ of 2/9.  If you have any software
that does this, you will need to make a change in your BIOS.  Typically, 
the PCI BIOS allows you to allocate one or more IRQ's for use with either
the PCI bus or ISA bus.  By default, many of the BIOS's use IRQ 9 as the 
PCI IRQ.  To resolve a conflict, you must tell the PCI BIOS to use a 
different IRQ.  This can generally be accomplished by going to the PCI 
Setup screen of the BIOS setup program.  Once there, most setup programs 
give you a set of IRQ's that can be switched between the PCI bus and the 
ISA bus.  

For additional information, consult the BIOS documentation that came with
your PC.