Manufacturer/Support

Norton-Lambert Corporation
(805)964-6767

Close-Up v5.0/v6.0 for Windows:
DIP Switches: 3, 5, and 8 DOWN(ON) 

To execute Close-Up v5.0/v6.0 for Windows, you need to load CHOST or 
CREMOTE in DOS before loading Windows. CHOST and CREMOTE can not be run 
in a DOS window. This program is configured entirely through DOS 
applications(See Clise-Up v5.0/v6.0 for DOS), and can not be configured 
through Windows.

_______________________________________________________________________


Close-Up v3.x.x/v4.x.x for DOS:
DIP Switches: 3, 5, and 8 DOWN(ON)

Support Program:
  * Type SUPPORT and press the ENTER key. 
  * Press Alt-S and select SETUP.  
  * Select Modem and change the setting to User Defined. 
  * Change the Initialization String to "AT&F&B1&H1&R2X4&W". 
  * Press the ENTER key twice. 
  * Set the baud rate to 19,200 for our 14.4k modems, and 38,400 or higher 
    for our faster modems. 
  * Select the appropriate COM Port for your modem. 
  * Save the changes by pressing the ESC key. 
  * Select Save Menu Parameters and press the ENTER key. Then type "Y".

Customer Program:
* Type CUSTOMER and press the ENTER key. 
* Press Alt-M and select SETUP. 
* Select Modem and change the setting to User Defined. 
* Change the Initialization String to "AT&F&B1&H1&R2X4&W". 
* Press the ENTER key twice. 
* Set the baud rate to 19,200 for our 14.4k modems, and 38,400 or higher 
  for our faster modems. 
* Select the appropriate COM Port for your modem. 
* To dial out, select the PHONE option. 
* Select Dial to place a call, and Hang Up to disconnect. 
* To exit, press the ESC key.

Note:  If you ever need to get into Terminal Mode, run the Customer 
       program as described above. Then press Alt-M, select "Terminal", 
       and press the ENTER key. You are now in terminal mode. To exit 
       terminal mode, press the ESC key, then press "Alt-M".

________________________________________________________________________


Close-Up v5.0/v6.0 for DOS:
DIP Switches: 3, 5, and 8 DOWN(ON)

All program settings are automatically configured via the "CSETUP.EXE" 
program which is run during the initial installation. If you need to 
change the COM Port or IRQ settings, after the initial installation, 
run the "CSETUP.EXE" program again. It will automatically run through 
and detect everything on your system. During the system check, it will 
also check for device conflicts. If you have PC Anywhere v4.5 installed 
in your system, Close-Up will modify your SYSTEM.INI and WIN.INI files 
to remove any statements added by PC Anywhere. Close-Up will not run 
unless these statements are removed.

After "CSETUP.EXE" is finished configuring the software, there are a 
couple changes that need to be made: 

  1. Run the CHOST program using the EDIT option(i.e. "CHOST.EXE EDIT"). 
     When the init string screen appears, change the Reset String from 
     "AT\", to "ATZ\". 
  2. The Hang-Up string is specified as "+++^^^ATH0\", and should be 
     changed to "+++^^^+++ATH0\".M

The above changes should also be applied to the copy of Close-Up running 
on the remote machine(run "CREMOTE EDIT" instead). By making the above 
two changes, the software should work fine.

TERMINAL MODE:  Run the "CREMOTE" program and pull down the "Setup" menu. 
                Make sure the COM Port number is correct, and select 
                "Modem Initialization and Control:". It will then 
                initialize your modem and put you into terminal mode. 
                Everything you type will be echoed twice, so don't be 
                confused by this. One other thing to note, is if you have 
                your port speed set above 4800bps, you will notice 
                character loss when you attempt to display your modem's 
                ATI4 or ATI5 screens. Since the terminal screen is not 
                big enough to show all of the ATI4 or ATI5 screen anyway, 
                we suggest using this terminal only to get "AT" and "OK" 
                responses.