Manufacturer/Support

Artisoft, Inc.
2202 North Forbes Blvd.
Tucson, Arizona 85745
USA
(908)855-9440

Co/Session v5.0:
DIP Switches: 3, 5, and 8 DOWN(ON) 

To make configuration changes to Co/Session, run "SCALLID" in the 
Co/Session directory.

CHANGE PORT:  From the Phone Book Setup screen, hit "F3". <TAB> over to 
              the COM Port selection and hit the "P" key to cycle 
              through the COM Ports.

CHANGE IRQ:  Hit "M" to bring up a list of modems. Select "CUSTOM" modem, 
             and edit the profile. Set the port address and IRQ level to 
             match your modem.

INIT STRING:  The init string will automatically be set if you selected a 
              modem from the modem list. If your modem is not listed, 
              choose "CUSTOM" modem and you can manually enter your 
              modem options. In the "INITIALIZE" field, enter
              "AT&F&B1&H1&R2&A0]"(The right bracket is used by Co/Session 
              as an <ENTER> key). Tab down to the Hardware Flow Control 
              field and set it to "YES".   Press "F10" to save the 
              default entry.

TERMINAL MODE:  Co/Session does not feature a terminal mode.

Note:  This setup is for both the "SUPPORT" and "APPLICA" programs.

_________________________________________________________________________


Co/Session for Windows v1.0E:
DIP Switches: 3, 5, and 8 DOWN(ON) 

Everything is automatically configured during installation. The modem list 
has options for almost all of our Courier, Sportster, and Worldport high 
speed modems. If your modem is not on the list, choose the one closest 
to your model.

_________________________________________________________________________


Co/Session Windows Remote:

CHANGE PORT:  Pull down the "Setup" menu and select "Serial Setup". The 
              COM Port setting is located in the upper left corner of 
              the dialog box.

CHANGE IRQ:  The program uses the settings in the Windows Control Panel.

INIT STRING:  Pull down the "Setup" menu and select "Serial Setup". Click 
              the "MORE>>" button on the right hand side of the dialog 
              box. An init string dialog box will appear with the 
              following init string:     
              "ATZ\,ATV1Q0&H1&R2&M4&B1&K1X4&A3M1&N0&C1&D2\;OK". This 
              init string will work with all of our high speed modems.

TERMINAL MODE:  None.

_________________________________________________________________________


Co/Session Windows Host:

CHANGE PORT:  Pull down the "Setup" menu and choose "Phonebook". Select 
              the "Communications" box to change your port setting.

CHANGE IRQ:  The program uses the settings in the Windows Control Panel.

INIT STRING:  Pull down the "Setup" menu and select "Phonebook". Press the 
              "MORE>>" button and the current init string will be 
              displayed. It should be as follows: 
              "ATZ\,ATV1Q0&H1&R2&M4&B1&K1X4&A3M1&N0&C1&D2\;OK".  
              If your init string is different then the one listed above, 
              change it to match the given init string.

TERMINAL MODE:  None.