Manufacturer/Support

Attachmate
(800) 426-6283 - Sales
(206) 957-7764 - Technical Support
(206) 649-6660 - BBS
support@attachmate.com - email support

Crosstalk Communicator v2.1.0 for DOS:
DIP Switches: 3, 5, and 8 DOWN(ON) 

CHANGE PORT:   From the dialing directory type "Alt-M" and then choose 
               "Connector". Next select the port your modem is on.

CHANGE IRQ:  From the dialing directory type "Alt-Y", "PgDn", then 
             "ENTER". Press the down arrow key until you are on the IRQ 
             line.  Set the IRQ value according to what your modem is 
             configured to.

INIT STRING:  From the dialing directory type "Alt-Y", "PgDn", then 
              "ENTER". Change the parameter "ModemInit" to the following:  
              ^M~AT X6 &B1 &H1 &R2 E0 V1^M.

TERMINAL MODE:  From the dialing directory, highlight "MODEM" and hit 
                "ENTER".  During installation, make sure to select your 
                modem, or the one closest to it.

_________________________________________________________________________


Crosstalk v1.1 for Windows:
DIP Switches: 3, 5, and 8 DOWN(ON)

CHANGE PORT:  Run the "CONFIG" script from within Crosstalk for Windows.

INIT STRING:  The Init String is not changeable. It is found in the 
              modem script file.

TERMINAL MODE:  Crosstalk for Windows starts in Terminal Mode. During 
                installation, make sure to select your modem, or the one 
                closest to it.