Manufacturer/Support

Delrina Technologies, Inc. / Symantec
(416) 441-6110 - Technical Support
(416) 441-0774 - FAX
(541) 984-2490 - Fax on Demand
(541) 484-6669 - BBS
GO SYMANTEC - CompuServe
ftp.symantec.com - FTP Site

DOSFax Pro v2.0 for DOS:
DIP Switches: 3, 5, and 8 DOWN(ON)

Run "DOSFAX -s", or "SETUP.BAT" to start the DOSFax configurator. Both 
files are found in the DOSFax directory. To set the advanced options, 
select the "Advanced" button, or type "Alt-E".

CHANGE PORT:  Rather than selecting the COM Port directly, you need to 
select the COM Port's actual Port Address. An example would be if you 
wanted to use COM1, you would select a port address of 03F8.

CHANGE IRQ:  The IRQ selection box is under the section for setting the 
             Port Address.

INIT STRING:  You set the Init String on the Advanced Setting screen. 
              The Init String should be as follows: AT&F&H3&R2&I2S7=90\. 
              If you are having problems connecting to fax machines, add 
              "S36=0" before the backslash, in the above Init String.

TERMINAL MODE:  None.

We have two files available for use with DOSFax from Delrina Technologies.  
There were some problems between the software and all modems. The files 
are as follows and can be downloaded from our BBS(847-982-5092) or FTP 
Site(ftp.usr.com ):

"DFX02.ZIP"     -   200892   10-21-93   DosFax Update number 2 for 
                                        Delrina DOSFAX PRO
"USRDOSFX.EXE"  -    12652   10-21-93   Use this program to configure 
                                        your Delrina DOSFAX software 
                                        to work with a USR fax modem. 
                                        Run from DOSFAX directory.