Manufacturer/Support

FutureSoft Engineering, Inc.
12012 Wickchester, Suite 600
Houston, Texas 77079
(281) 588-6868 - Support
(281) 496-1090 - Fax
(281) 588-6870 - Bulletin Board System
76702,755 - CompuServe
support@fse.com - Email Support

DynaComm v3.10.02 for Windows:
DIP Switches: 3, 5, and 8 DOWN(ON)

Pull down the "Settings" menu to configure your communication paramaters.

CHANGE PORT:  Select "Communications" from the "Settings" menu. Go to the 
              "Connector" selection(similar to Windows Terminal), and 
              change the port setting to match that of your modem.

CHANGE IRQ:  This program used the IRQ settings in the Windows Control 
             Panel.

INIT STRING:  Select "Modem" from the "Settings" menu, then click on the 
              "Settings" button.  The Init String will automatically be 
              configured to:  ^M~ATB0&B1&H1&R2Q0V1X6E1S0=0^M.  If you 
              have a Sportster that only supports up to X4(check your 
              manual), replace the X6 above with X4.

TERMINAL MODE:  The program begins in Terminal Mode.

Note:  When you are selecting your modem from the modem list, you can 
       select any Courier, Sportster 1200/2400, or Worldport 2400 modem 
       from the list. For our newer modems, pick the "Courier v.32bis or 
       v.32bisPC". If you own a Worldport modem, can also pick the 
       "Courier v.32bis or v.32bisPC".