Manufacturer/Support

Global Village
1144 East Arques Ave.
Sunnyvale, California 94086
(770)984-8088 - Main
(716) 871-2993 - Support for Windows
(770) 984-9958 - Support for OS/2
(770)984-9956 - Fax
(770)984-9926 - BBS
pcsupport@globalvillage.com - Email Support

FaxWorks Pro v3.0 for Windows:
DIP Switches: 3, 5, and 8 DOWN(ON)

Note:  During installation, FaxWorks Pro will only see the first modem on 
       your system. If you have multiple modems installed in your 
       computer, you will be unable to use them with FaxWorks, short of 
       removing the other modem(s) during installation or while using the 
       software.

CHANGE PORT:  Configured through the "Modem Diagnostics" icon in the 
              "FaxWorks Pro" program group. The software automatically 
              selects the first modem it finds.  There is no good way 
              around this.

CHANGE IRQ:  The software uses the settings in the Windows Control 
             Panel.

INIT STRING:  Start FaxWorks Pro v3.0 and pull down the "Fax" menu. 
              Select "Fax Setup".  You can change the init string on 
              this screen by selecting the appropriate check boxes.  On 
              the upper left hand side of the screen are the flow 
              control options. 
              Make sure that the XON/XOFF check box is selected, and that 
              the CTS box is not checked. Your init string should now 
              read: "AT&H2&I2". 	

              Note:  Do not use "&F" in the initialization string. This 
                     will take the modem out of fax mode, and into data 
                     mode, before dialing.

TERMINAL MODE:  None, this is a fax only program.

Note:  FaxWorks Pro has troubles identifying our modems and also has 
       trouble identifying maximum fax speeds with v.FC and v.34 
       modems(primarily those that support Class 2.0 FAX). Because of 
       this, you will be limited to a maximum FAX speed of 9600 baud.