Manufacturer/Support

1:170/400 - Bruce Bodger Fidonet
2:201/329 - Mats Wallin Fidonet

Frontdoor v2.11SW/v2.12SW/v2.20Commercial
DIP Switches: 3, 5, and 8 DOWN(ON)

Before running Frontdoor, make sure you have a FOSSIL driver loaded in
your system. All setup options for your modem can be found by running
"FDSETUP.EXE", in the Frontdoor directory. Select the "Modem" option,
then "Default Settings". Make sure your default setting screens are
configured like ours below.

Hardware dialog box:
Serial port                            2
Locked port                            Yes
Maximum baudrate                       Fixed
Reset modem to connect speed           No
Lower DTR when busy                    Yes
Lower DTR to terminate call            Yes
Toggle DTR before dialing              No
Carrier detect mask (CDMASK)           128
                                       

Command Strings dialog box:
Escape code          +++
Return on-line       ~ATO|
Onhook               ATH0|
Offhook              ~ATH1M0|
Dial                 ATDT
+-Prefix             
+-Suffix             | (pipe character, shift-\)
Delay                7
Init-1               AT&F&B1&H1&R2&A3&K3X4H0M0|
Init-2               
Init-3               
Down                 ATH1M0|
Reset                ATZ|

Answer Control dialog box:
Manual answer      Yes
Force answer       ATA|
Answer delay       7
Enable LDFRS       No