Manufacturer/Support

Smith Micro Software, Inc.
(714) 362-2350 - Technical Support
(714) 362-5822 - BBS
(714) 362-2300 - Fax
(714) 362-2396 - Fax on Demand
GO SMITHMICRO - CompuServe
bbs.smithmicro.com - Telnet BBS
HFDOS@smithmicro.com - Email Support
sales@smithmicro.com - Email Sales

Hotfax v2.0/v2.01 for DOS:
DIP Switches: 3, 5, and 8 DOWN (ON)

Run "HOTFAX.BAT". After the logo screen appears, press the "ENTER" key
to activate terminal mode. To enter the modem setup section, click on
"Alt-S".

CHANGE PORT:  Go to the modem setup screen by choosing "Modem" from
              the "Setup" menu.

CHANGE IRQ:  To specify the IRQ, you must choose the port "Other" in
             the "Modem Setup" dialog. INIT STRING: It is automatically
             specified in the modem selection upon installation.

TERMINAL MODE:  Program starts in terminal mode.

Note:  Hotfax 2.0 was not designed to work with U.S. Robotics modems.
       You need to download the 2.0 to 2.01 upgrade for this software 
       to work with our modems. The upgrade is free if the software was 
       purchased within the last 90 days. If it has been more than 90 
       days since you purchased the software, there will be an upgrade
       charge. To receive the upgrade, call (714)362-2345. This only 
       applies to Hotfax 2.0 for DOS.