Manufacturer/Support

Further Development, Inc.
P.O. Box 821864
South Florida, FL 33082-1864
(954) 418-9400 - Voice
(954) 418-8110 - BBS Node 1
(954) 418-8085 - BBS Node 2
(954) 426-2233 - FAX
1:369/35 - Fido Node
1:369/102 - Fido Node
support@furtherdev.com - Email Support

Intermail v2.21 and higher:
DIP Switches: 3, 5, and 8 DOWN (ON)

Before running Intermail, make sure you have a FOSSIL driver installed
and running in your system.

  1. Run "IMSETUP.EXE" in the Intermail directory.
  2. Select "Modem", then "Advanced Setup".
  3. Select the "Modem Selection" option and choose the modem model
     closest to yours.

The following screens are from the "Default Settings" menu:

Note:  The below setup is for use with our Courier Terbo/v.FC,
       Sportster v.FC or newer modems in adaptive answer mode. For 
       non-adaptive answering modems, do not use Init strings 2
       and 3, take out all references to the "+FCLASS" command,
       and make the answer command "ATA" instead of "AT+FAA=1A".

Hardware dialog box:                   
                                       
Modem port                             2
Maximum baud rate                      57600
Lock port                              Yes
Reset modem to connect speed           No
Lower DTR when busy                    No
Lower DTR to terminate call            Yes
Toggle DTR before dialing              No

Command Strings dialog box:     
Escape code                     +++
Return on-line                  ~ATO|
Onhook                          ATH0|
Offhook                         ~ATM0H1|
Dial                            ATDT
+-Prefix                        +FCLASS=0DT
+-Suffix                        |
Delay                           3
Init-1                          AT&FH0X6M1&A3&K3&B1&H1&R2S11=38|
Init-2                          AT+FCLASS=2.0+FLI="708.676.7314"|
Init-3                          AT+FNR=1,1|
Down                            ATH1M0+FCLASS=0|
Reset                           ATZ|
                                
If you are not using a Sportster, change the X6 in the Init-1 dialog
box to X4.

Answer Control dialog box:               
Manual answer                            Yes
Force answer                             AT+FAA=1A|
Answer delay                             7

       Connect Strings                                    
         dialog box:
#   Connect Message       Speed        EC      BBSexit     Terminate
--- --------------------  -----------  ------- ----------- ----------
-   ---------             ------       ---     -----       -----
1   CONNECT|              300          N       200         0
2   CONNECT 1200|         1200         N       201         0
3   CONNECT 1200/         1200         N       202         0
4   CONNECT 2400          2400         N       203         0
5   CONNECT 4800          4800         N       204         0
6   CONNECT 7200          7200         N       205         0
7   CONNECT 9600          9600         N       206         0
8   CONNECT 12000         12000        N       207         0
9   CONNECT 14400         14400        Y       208         0
10  CONNECT 16800         16800        Y       209         0
11  CONNECT 19200         19200        Y       210         0
12  FAX                   19200        Y       255         0
13  +FCON                 19200        Y       255         0
14  CONNECT 21600         21600        Y       211         0
15  CONNECT 24000         24000        Y       212         0
16  CONNECT 26400         26400        Y       213         0
17  CONNECT 28800         28800        Y       214         0