Manufacturer/Support

Novell, Inc.
1555 North Technology Way
Orem, UT 84097
(801) 222-6000 - Main
(800) 453-1267 - Main
(800) 453-1267 - Fax
(800) 209-3500 - FaxBack
(800) 451-5151 - Voice
(801) 222-5077 - Fax

MTEZ v1.16 for DOS:
DIP Switches: 3, 5, and 8 DOWN (ON)

Run the program by typing "MTEZ" in the program directory. The software 
will automatically start up and present you with a menu of options.

CHANGE PORT:  Select "Change", then highlight "Parameters". From here
              you can change the port, baud rate, and line 
              settings(parity, word length, and stop bits). The highest 
              port speed is 38400.

CHANGE IRQ:  Run "PORTUTIL.EXE" in the MTEZ directory.
            Usage: PORTUTIL [port:base,irq];
                   "port"   COM1 through COM4
                   "base"   Hexadecimal base address(0000-FFFF)
                   "irq"    Decimal IRQ number(2-7);
            Example: PORTUTIL COM3:3E8,5

INIT STRING:  Select "Change", then highlight "Setup". The below
              diagram shows how the setup screen should be configured.

TERMINAL MODE:  From the main menu, click on "Terminal".

"Setup" screen:
Alt-Z Help      OffLine        FDX CR              MTEZ by
                                                MagicSoft, Inc.
                                                   
---- Modem ---- -------------- ---- Other -------  -------------
----            ---
Modem Type:     USRobotics HST Emulation:          ANSI-BBS
                V.32
User Setup:     AT&F&B1&H1&R2& Menu System:        Yes
                A3&K3
Dial Method:    Tone           Dial EC Level:      MNP5
Redial Delay:   10             Answer EC Level:    MNP5
Speaker:        On Until       Enquire (ENQ):      OFF
                Connect
---- ASCII      -------        Flow Control:       CTS/RTS
Upload ---
Line Pacing     10             Host Password:      
(1/10):
Char Pacing     15             Shell Password:     
(1/1000):
Expand Blank    Yes            RTS/Disk Write:     No
Lines:
CR Translate:   None           Hangup if No EC     No
LF Translate:   Strip                              
Stop on a Ctrl- Yes                                
Z:
---- File ----- ------------   ------------------  
--                            --------
Send Dir:       SEND                               
Recv Dir:       RECV                               
Screen Dump:    MTEZ.SCR                           
Editor:                                            
View Utility:                                      
                                                   
to Select       F2 Modem List  -+ Next Item        F10 Accept Page