Manufacturer/Support

PowerBBS Computing
35 Fox Ct.
Hicksville, NY. 11801
(516)822-7396 - BBS
74774.3326@CompuServe.COM - Email Support
GO PBBS - Compuserve

PowerBBS for Windows v4.01
DIP Switches: 3,5,and 8 DOWN (ON)

CHANGE PORT:  In the PowerBBS group, click on the CONFIG icon, then
              the Modem icon. The port is configured in the `Com Port'
              pull down menu.

CHANGE IRQ:  This software uses the settings in the Windows Control
             Panel.

INIT STRING:  Start the CONFIG program and select the modem icon. Set
              Modem Command(1) to ATZ, Modem Command(2) to AT&F1S0=0, 
              and the Modem Drop Carrier String to ATH0.

TERMINAL MODE:  This is a BBS program. Terminal mode is unavailable.

Notes:  This program will not function properly if you have the
        RHSICOMM.DRV driver installed in your Windows SYSTEM.INI file. 
        To check this, open up the Windows SYSTEM.INI file(located in 
        your Windows directory) in a text editor, and look for the 
        line comm.drv= in the BOOT section. If it is set equal to 
        RHSICOMM.DRV, change it to comm.drv=comm.drv. If you leave it 
        set as COMM.DRV=RHSICOMM.DRV, the modem will disconnect after 
        the initial connection is made.

        Also make sure that `Lock Baud at Max' is checked and that 
        `Answer By True Ring Detect' is checked as well.