Manufacturer/Support

Mustang Software
6200 Lake Ming Road
Bakersfield, CA 93306
(805) 873-2500 - Main Number
(800) 999-9619 - Sales & Orders
(805) 873-2550 - Tech Support
(805) 873-2599 - Fax Number
(805) 873-2400 - BBS
GO MUSTANG - CompuServe
keyword MUSTANG - AOL
keyword MUSTANG - Microsoft Network
online.mustang.com - Telnet BBS
business@mustang.com - Customer Service
support@mustang.com - Technical Support

Qmodem v5.0/4.2x for DOS:
DIP Switches: 3, 5, and 8 DOWN(ON)

All modem options are found by typing "Alt-N" while in terminal
mode("QINSTALL" will load), then pull down the "MODEM" option.

CHANGE PORT:  Select "Communication Parameters", and move to the
              "Serial Port" option.  Change the port to match the 
              port your modem is on.

CHANGE IRQ:  Select "PORT SETUP". From this screen you can change both
             the base port address and IRQ level for COM1 through COM8.

INIT STRING:  Select "MODEM COMMANDS". From this screen, change the
              init string to "AT&F&B1&H1&R2&A3&K3X4^M".

TERMINAL MODE:  Qmodem starts in Terminal Mode.

Besides the above settings, there is one other screen of changes that
needs to be made. Select the "TOGGLES" option, which is found under
"MODEM". Make the following changes:

     XON/XOFF flow control        OFF
     CTS/RTS flow control         ON
     RTS when writing             OFF
     FIFO during shell            ON
     Lock DTE Baud Rate           ON
     High Speed XMIT              ON
     16550 UART Enable            ON
     Init ignores CD              OFF

Note:  The "QINSTALL" program, has a "Quick Modem Config" option under
       "MODEM". If your modem is listed, select it and the software 
       should configure everything correctly.

______________________________________________________________________


Qmodem Pro v1.52 for DOS:
DIP Switches: 3, 5, and 8 DOWN(ON)

All modem options are found by typing "Alt-N" while in Terminal Mode.
A menubar will appear where you should pull down "CONFIG" and select
"DEVICE".

CHANGE PORT:  Select the "Hardware" button or type "Alt-H" to enter
              hardware setup. The Port can be set by typing "Alt-O" or 
              clicking on the correct COM Port number.

CHANGE IRQ:  Select the "Hardware" button or type "Alt-H". Next click
             on the "Config Ports" button or type "Alt-C" to enter the 
             Port configuration dialog box. From this screen, you can 
             set the base port address and IRQ levels for all COM 
             ports.

INIT STRING:  There are two initialization strings which can be
              configured. One for terminal mode, and one for host 
              mode. To set the Terminal Mode init string, click on
              "Term Cmds" or type "Alt-C". To set the Host Mode init 
              string, click on "Host Cmds" or hit "Alt-S". Set both 
              init strings to "AT&F&B1&H1&R2&A3&K3X4^M".

TERMINAL MODE:  Qmodem Pro starts in Terminal Mode.

Note:  There is a "Device Quick Config" in the "DEVICE" dialog box.
       This will automatically configure the software to work with 
       most of our modems, including the Sportster 14.4k and Courier 
       HST 16.8k Dual Standard. If your model is not in the list, 
       select the one closest to it.

_____________________________________________________________________


Qmodem Pro v1.00/v1.01/v1.10 for Windows:
DIP Switches: 3, 5, and 8 DOWN(ON)

All modem options are found by pulling down the "Options" menu and
selecting "Device".

CHANGE PORT:  Click on the "Hardware" button and change the Port to
              the same setting as your modem.

CHANGE IRQ:  This program uses the settings in the Windows Control
             Panel.

INIT STRING:  Click on the "Modem" button and set the init string to
              "AT&F&B1&H1&R2&A3&K3X4^M"

TERMINAL MODE:  Qmodem Pro for Windows starts in Terminal Mode.

Note:  There is a "Quick Config" button on the "Edit Devices" dialog
       box. It will automatically configure the software to work with 
       most of our modems, including the Sportster 14.4k and Courier 
       HST 16.8k Dual Standard. If your modem is not listed, select 
       the one closest to it.