U.S. Robotics                              Software Setup/Quicklink
Page 1                                      document #10338  5/18/97
Manufacturer/Support

Smith Micro Software, Inc.
(714) 362-5810 - Tech Support
(714) 362-2399 - Fax
(714) 362-2396 - Fax on Demand
(714) 362-5822 - BBS
QLWin@smithmicro.com - Email Windows Support
QLDOS@smithmicro.com - Email Dos Support
bbs.smithmicro.com - Telnet BBS
GO SMITHMICRO - CompuServe

Quicklink II v3.0.2 for DOS:
DIP Switches: 3, 5, and 8 DOWN (ON)

CHANGE PORT:  Pull down the Setup menu by typing "ALT-S" and select
"Modem Setup".
                              Set the Port to the one your modem is
on.

CHANGE IRQ:  Pull down the Setup menu by typing "ALT-S", selecting
"Modem Setup", and
                          then typing "ALT-I". Change the IRQ to match
what your modem is set to.

INIT STRING:  Pull down the Setup menu by typing "ALT-S", then
selecting "Modem Setup".
                        Change the init string to
"AT&F&B1&H1&R2&A3&K3X4S0=0".

TERMINAL MODE:  The program starts in terminal mode.




Quicklink II v1.4 for Windows
DIP Switches: 3, 5, 8 DOWN (ON)

CHANGE PORT:  Pull down the Setup menu and select "Modem Setup". Set
the port setting
                             under "Com Port:".

CHANGE IRQ:  This program uses the settings in the Windows Control
Panel.

INIT STRING:  Pull down the Setup menu by typing "ALT-S" and select
"Modem Setup". Change
                         init string to
"AT&F&B1&H1&R2&A3&K3X4S0=0S7=90S36=0".

TERMINAL MODE:  The program starts in terminal mode.