Manufacturer/Support

deltaComm Development, Inc.
507 Airport Boulevard, Suite 109
Morrisville, NC 27560
(919) 460-4556 - Technical Support
(919) 460-4531 - FAX
(919) 467-1143 - Sales & Info
(800) 859-8000 - Sales & Info
(919)481-9399 - BBS
support@delta.com - Email Support

Telix v3.15/v3.21/v3.22 for DOS:
DIP Switches: 3, 5 and 8 DOWN (ON)

All program options are selected by first hitting "Alt-O" in terminal
mode. The below options are then available on a setup menu:

CHANGE PORT:  Select "Terminal Options", then click "A" to change the
              COM Port, baud rate and line settings.

CHANGE IRQ:  Select "Com Port Setup". From here you can modify the
             port address and IRQ level for each COM Port, from 1-8.

INIT STRING:  Select "Modem and Dialing", then click "A" to change the
              init string. Set the init string to 
              ~AT&F&B1&H1&R2&A3&K3X4S11=40^M.  Also make sure that
              option M, "Auto baud detect", is turned OFF.

TERMINAL MODE:  The program starts in terminal mode.

When first installing Telix, you will be prompted for a modem type.
All U.S. Robotics high speed modems are listed, so select your model,
or the one closest to it. If you are having problems, try re-
installing your software, re-selecting your modem type.

Note:  If you are using Telix v3.21, update to version 3.22. We have
       found problems with v3.21 dropping DTR and closing the port 
       with 16550 UARTs.