Manufacturer/Support

CompuServe Incorporated
(800) 848-8199 - Sales
(800) 848-8990 - Service
(206) 957-8998 - Technical Support
(614) 529-1611 - Fax
support@sprynet.com - Windows Technical Support
macsupport@sprynet.com - Macintosh Technical Support

WinCIM v1.0.5 for Windows:
DIP Switches: 3, 5, and 8 DOWN (ON)

CHANGE PORT:  Under the "Settings" menu, select "Session Settings".
              Change the port to match your modem's setting under the 
              box marked "Connector".

CHANGE IRQ:  This program uses the settings in the Windows Control
             Panel.

INIT STRING:  Pull down the "Settings" menu and select "Modem
              Settings". Change the init string to 
              AT&F&B1&H1&R2&A0&K3X4^M.

TERMINAL MODE:  Not available. This program is used to dial into the
                CompuServe on-line service.

Note:  Pull down the "Settings" menu, select "Modem Settings", and
       make sure the modem type is set to "Current Settings".