Manufacturer/Support

Delrina Technologies, Inc. / Symantec
(416) 441-6110 - Technical Support
(416) 441-0774 - FAX
(541) 984-2490 - Fax on Demand
(541) 484-6669 - BBS
GO SYMANTEC - CompuServe
ftp.symantec.com - FTP Site

Wincom Pro v1.0 (Nov. 10, 1993) for Windows:
DIP Switches: 3, 5, and 8 DOWN (ON)

Click once on the "New Session Settings" in the 
"Phonebook"(automatically opens when you run it). Pull down the "File"
menu, and select "Open". The "New Session Settings" dialog box will
open.

CHANGE PORT:  Pull down the "Properties" menu and select "Settings".
              The COM Port and its definition are set on this screen.
              Next select "Standard Com Port" and then the COM Port 
              number the modem is on.

CHANGE IRQ:  This program uses the settings in the Windows Control
             Panel.

INIT STRING:  Pull down the "Properties" menu and select "Settings".
              Click the "Modem Setup" button, and then on "Modem
              Definition". Make sure the init string is setup to 
              AT&FE1V1Q0X4B0&B1&H1&R2&N0&A3S11=55. The "Hardware
              Handshaking" checkbox should also be checked.

TERMINAL MODE:  Click on the "Direct Connect" icon in the phonebook.
                This will prompt you to input a telephone number. 
                Click the "CANCEL" button, then pull down the "File" 
                menu and select "Connect Special" from the options 
                menu.  Choose "Open port but do not dial phone 
                number". You are now in terminal mode.

Note:  There are modem selections for all of our older modems with the
       exception of the Sportster 14,400. You can use the "USR Courier 
       v.32bis" selection in its place.  v.FC/v.34 and newer modems can 
       use the Courier v.terbo selection with the port speed set to 
       38400.