Manufacturer/Support Worden Brothers, Inc. Five Oaks Office Park 4905 Pine Cone Drive Durham, NC 27707 (800) 776-4940 - Sales (919) 408-0542 - Support (919) 408-0545 - Fax TeleChart 2000 3.0 for DOS DIP Switches: 3, 5 and 8 DOWN(ON) Insert the first disk and run INSTALL. The program will install the necessary files to run TeleChart 2000 onto your hard drive. After your system reboots, run TC.EXE. Enter your user number and password, then select the COM Port the modem is on. Some files will be copied. Changing Modem Settings 1. Press on the main menu. 2. If the settings are wrong, press to change them. 3. Reselect the COM Port. 4. Enter the correct IRQ. 5. Enter the correct baud rate for your modem. If you have a 14.4k modem, enter a baud rate of 19.2k, and if you have a 21.6k or faster modem, enter 38.4k or higher for the baud rate. 6. Select tone or pulse for the dialing type. 7. For the modem Setup String, enter AT&F1. 8. Press to return to the main menu. Using these settings, you should have no problems connecting to the TeleChart 2000 Charting System. If you choose to run Telechart 2000 under OS/2, and you receive an ERROR of "Exceeded Garbage Count", or any other download errors in OS/2, check the following: COM_DIRECT_ACCESS ON DOS_HIGH ON EMS_MEMORY_LIMIT 0 IDLE_SECONDS 60 DOS_BACKGROUND_EXECUTION OFF VDM_PRIORITY 16 XMS_MEMORY_LIMIT 64