                   Release Notes  PN 93000607

               Digi RealPort Driver & Setup Wizard
                  Version 3.6.324.0, 11/14/2006

                      Microsoft Windows XP
                    Microsoft Windows XP x64
                  Microsoft Windows Server 2003
                Microsoft Windows Server 2003 x64

                       Software Package PN
                            40002549
                             Rev. A

  CONTENTS

  Section      Description
  -------------------------------
  1            Introduction
  2            Supported Operating Systems
  3            Supported Products
  4            Help and Documentation
  5            Release History


  1. INTRODUCTION

     This document contains general information as well as 
     last minute changes for the Digi RealPort driver and
     Setup Wizard.


  2. SUPPORTED OPERATING SYSTEMS

     Microsoft Windows XP
     Microsoft Windows XP x64
     Microsoft Windows Server 2003
     Microsoft Windows Server 2003 x64


  3. SUPPORTED PRODUCTS

     Digi Connect Family
     Digi ConnectPort Family
     Digi EtherLite Family
     Digi One Family
     Digi PortServer Family
     Digi PortServer TS Family


  4. HELP AND DOCUMENTATION

     Help and Documentation for installing, updating, removing and
     configuring Digi RealPort for Windows can be found in the help 
     file, digirlpt.chm.

     digirlpt.chm is part of the same software package as this file.
     To view the help file, browse to the directory containing the
     software package and double-click on the file, digirlpt.chm.

     If a Digi RealPort device is installed, the help file can also 
     be accessed from the Device Manager, via the device's Multi-port 
     serial adapters property page.


  5. HISTORY

     Version 3.6.324.0, 11/14/2006 (Rev. A)
     --------------------------------------------
     o AMD64 64-bit support for Windows XP x64 and Server 2003 x64.
     o Significantly improved device installation time.
     o Added CLI [===>] sliders to indicate Setup Wizard progress
       (use /silent to suppress output).
     o Added more useful information when Setup Wizard fails on 
       exception, including the file name and line number where the 
       exception was raised; this applies to both the CLI and GUI.
     o Added timeout to wait for COM port data to drain on close
     o Corrected /skipenumerations to apply to all ports on /install.
     o Reworded the two Port Network Profiles:
       1. The default setting, "Latency-Optimized TCP",
          is renamed "TCP: Typical Settings";
       2. The cellular environment-targeted setting, "Throughput-
          Optimized TCP", is renamed "TCP: Less Overhead".
     o Added two additional Port Network Profiles:
       1. "TCP: Modified Read/Write" acts like "Typical Settings"
          but may cause some applications to write data more 
          efficiently and may cause the device to transport serial data 
          using fewer network packets and less overhead;
       2. "TCP: Low Overhead/No Deltas" works like "Less Overhead" 
          but further reduces network traffic by suppressing line 
          change notifications and disabling RealPort Keep Alive packets 
          (flow control still works if your application sets it and 
          forgets it, but do not use this setting if your application 
          needs to know the current state of line signals and when they 
          change).
     o Removed the "Optimize for Throughput" checkbox from the RealPort
       Setup Wizard Discovery page and replaced it with a drop-down list 
       of Network Profiles on the Describe Device page.
     o Fixed Keep-alive mechanism, which was slewing its time calculation
     o Updated Event Viewer-logging of application name to be universally 
       supported on all operating systems (rather than logging "Unknown")
     o Updated help with discussion of writing applications for networked-
       serial devices, troubleshooting help, and details about the new
       Network Profiles.
     o Created new package (this package, PN 40002549) to support x64, 
       and migrated support for Windows XP and Windows Server 2003 from 
       PN 40002164, the Digi RealPort Driver & Setup Wizard for Windows 
       2000.

     Changelog copied from PN 40002164:
     ----------------------------------

     Version 3.5.316.0, 07/12/2006 (Rev. V)
     --------------------------------------------
     o Fixed race condition on close while losing network 
       connectivity causes CloseHandle to hang.
     o Fixed race condition on purge while also calling ReadFile 
       from another thread causes new read to be canceled.
     o Fixed race condition on write timeout while another WriteFile
       request is pending and a network interruption occurs causes
       second write to hang.
     o Corrected blue screen when using Always Grant Port Opens, 
       driver is loading, network stack is not done loading, and port
       is accessed by user application.
     o Fixed problem pending first WriteFile when using Always Grant
       and network stack is not done loading.
     o Added option to never block serial communication 
       API calls because of network response lag.
     o Added setup CLI options /pnet and /ptcp to supercede /pnetw.
     o Added setup CLI options /pser and /padv to replace /port.
     o Added network and port re-connection controls to throttle network 
       activity for byte-conscious environments (for IP-addressed devices).
     o Added additional controls to allow user to influence network usage, 
       including: Port data drain-on-close timeout; Port is being shared; 
       and, Wait on COM open before starting network.
     o On update, now fixing ports' driver versions to reflect new version.
     o Added absolute TCP timeout to unblock driver when critical device 
       responses are dropped and the system network stack does not properly 
       detect the situation.
     o Improved driver load time on boot.
     o Improved driver update time when SkipEnumerations is enabled.

     Version 3.4.306.0, 06/16/2006 (Rev. U)
     --------------------------------------------
     o Improved device installation time.
     o Fixed problem with the first port of additional device 
       installations being installed before Serenum runs,
       causing the port to not be installed correctly.

     Version 3.2.273.0, 09/23/2005 (Rev. S)
     --------------------------------------------
     o Added feature to optimize network usage for different
       networks -- i.e., wired, wireless, and cellular.
     o Added 'examine' command to RealPort Setup Wizard CLI
       to simplify driver backup, restoration and deployment.
     o Added option to use device MAC or DNS name rather than IP address.
     o Added digirlpt.chm context and HTML help.
     o Updated 'change' command in RealPort Setup Wizard CLI to 
       support /id, /likeid, /com, and /likecom switches.
     o Fixed RTS toggle to not require CTS to be asserted to send.
     o Added feature to coalesce data for legacy applications.
     o Corrected processing of SERIAL_NULL_STRIPPING.
     o Resolved transmission issue with offline device when
       port is configured for Always Grant Port Open Requests.
     o Corrected support of XonLimit and XoffLimit.
     o Fixed problem loading driver when Registry misconfigured.
     o Corrected blue screen on ARP from closed cellular device.
     o Corrected polling application receive resource exhaustion issue.
     o Exposed option to force RTS Toggle flow for legacy applications.
     o Added option to set SkipEnumerations Serenum key.
     o Fixed issue sending command after device rejects open request.

     Version 3.1.243.0, 11/15/2004 (Rev. R)
     --------------------------------------------
     o Added support for Digi PortServer TS MEI Families, including
       Wireless, Modem, Hardened, and Power series.
     o Resolved issue with updating three or more adapters in 
       Windows Server 2003 unnecessarily prompting for reboot.
     o Resolved issue with Setup Wizard failing if it encountered 
       corrupt or unparsable INFs in the Windows INF directory.
     o Fixed condition during driver update that could cause a 
       bugcheck.
     o Fixed a condition where closing the ports during a network 
       outage and subsequently disabling the adapter freezes the 
       system.
     o Resolved problem with opened ports being unresponsive after 
       returning from hibernation or sleep.
     o Fixed problem with COM ports being mislabeled in Device 
       Manager after device installation.
     o Added Registry option to specify that a port should always 
       be configured for RTS toggle.
     o Modified behavior of "Always grant port open requests" to
       try to establish connection before succeeding open request.
     o Fixed a condition where write timeout processing under certain
       conditions may cause a bugcheck.
     o Fixed condition where read timeout processing while also handling
       incoming read data under certain conditions may cause a bugcheck.
     o Added encryption support for DOIAP.
     o Corrected Setup Wizard to always enable encryption for a 
       device when the user specifies as such during installation.
     o Modified SetQueueSize to accept any queue size.
     o Fixed problem with encryption service unloading unexpectedly
       after disabling encryption for a device.
     o Fixed issue reopening port when "Always Grant Port Open 
       Requests" is enabled under certain conditions.
     o Corrected support for IOCTL_SERIAL_LSRMST_INSERT.

     Version 3.0.226.0, 03/18/2004 (Rev. P)
     --------------------------------------------
     o Added Digi RealPort Setup Wizard for installing, updating,
       and removing RealPort device driver and devices
     o Updated Device Manager user interface.
     o Added registry option to force baud rate.
     o Added registry option to disable DOSMODE.
     o Improved Event Log messages in case of network disconnect.
     o Resolved issues with Complete write requests immediately.
     o Improved handling of network outage.
     o Added support for IOCTL_SERIAL_XOFF_COUNTER.
     o Added registry option to force xedata (ignore serial errors).
     o Fixed support for IOCTL_SERIAL_IMMEDIATE_CHAR.
     o Fixed a condition where a network disconnect under certain
       conditions may cause a bugcheck.

     Version 2.8.94.0, 06/10/2003 (Rev. N)
     --------------------------------------------
     o Added support for Digi Connect ME.
     o Fixed a problem processing write requests after the input
       buffer is cleared with PurgeComm during network disconnect.
     o Corrected break event signaling.
     o Fixed detection of modem line transitions for EtherLite 2.

     Version 2.7.90.0, 04/22/2003 (Rev. M)
     --------------------------------------------
     o Added support for Microsoft Windows Server 2003
     o Improved management of outgoing network resources.
     o Fixed a condition where a network disconnect under certain
       conditions may cause a bugcheck.
     o Fixed RTS Toggle functionality. A RTS pre- and post-delay
       can be configured through the command line interface or the
       web interface of your Digi One or Digi PortServer.
     o Modified the Complete Writes Immediately feature to allow
       queued data to drain when the port is closed.
     o Fixed framing error detection to not insert bogus data
       into the read data stream.
     o Modified driver to default uninitialized ports to 1200,7,e,1,
       like the standard serial driver, and to maintain baud rate,
       line settings and flow control across opens.
     o Added code to force RTS low when device is closed; sometimes,
       if a port was using RTS/CTS flow control and was closed, RTS
       would remain high.
     o Added support for Digi One TS H, Digi PortServer TS 2 H,
       and Digi PortServer TS 4 H.
     o Added support for Digi One TS W, Digi PortServer TS 2 W,
       and Digi PortServer TS 4 W.

     Version 2.6.82.0, 01/31/2003 (Rev. L)
     --------------------------------------------
     o Added support for Digi One EM, Digi One IA and Digi One SP.
     o Fixed race condition when switching parity states.
     o Modified Complete Write Requests Immediately feature to work
       irregardless of flow control.
     o Added user interface option "Send keep alive packets" to control
       keep alive packets sent to the remote device. The default setting
       is disabled.
     o Fixed condition where default Xon and Xoff characters were
       not initialized correctly.
     o Fixed detection of parity and framing errors.
     o Fixed Xon/Xoff limit bounds checking.
     o Exposed GUI option to allow serial ports to be opened
       even if the driver cannot communicate with the remote device.
     o Improved driver load time when network is disconnected.
     o Changed event reporting to begin accumulating events once
       SetCommMask is called, instead of waiting for WaitCommMask.
