# Digi Embedded Yocto (DEY) 5.0 ## Release 5.0-r1 This document provides information about Digi Embedded Yocto, Digi International's professional embedded Yocto development environment. Digi Embedded Yocto 5.0 is based on the Yocto Project(TM) 5.0 (Scarthgap) release. For a full list of supported features and interfaces please refer to the online documentation. # Tested OS versions The current release has been verified and tested with the following OS versions: * Ubuntu 20.04 * Ubuntu 22.04 # Supported Platforms Software for the following hardware platforms is in production support: ## ConnectCore MP25 * ConnectCore MP25 System-on-Module (SOM) * [CC-WST-J17D-NK](https://www.digi.com/products/models/cc-wst-j17d-nk) * [CC-ST-J17D-ZK](https://www.digi.com/products/models/cc-st-j17d-zk) * ConnectCore MP25 Development Kit (DVK) * [CC-WMP255-KIT](https://www.digi.com/products/models/cc-wmp255-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/5.0/ccmp25/yocto-gs_index)) ## ConnectCore 91 * ConnectCore 91 System-on-Module (SOM) * [CC-WMX-F26D-L1](https://www.digi.com/products/models/cc-wmx-f26d-l1) * [CC-MX-F26D-Z1](https://www.digi.com/products/models/cc-mx-f26d-z1) ## ConnectCore 93 * ConnectCore 93 System-on-Module (SOM) * [CC-WMX-YC7D-KN](https://www.digi.com/products/models/cc-wmx-yc7d-kn) * ConnectCore 93 Development Kit (DVK) * [CC-WMX93-KIT](https://www.digi.com/products/models/cc-wmx93-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/5.0/cc93/yocto-gs_index)) ## ConnectCore 8X * ConnectCore 8X System-on-Module (SOM) * [CC-WMX-JM8E-NN](https://www.digi.com/products/models/cc-wmx-jm8e-nn) * [CC-MX-JM8D-ZN](https://www.digi.com/products/models/cc-mx-jm8d-zn) * [CC-MX-JM7D-ZN](https://www.digi.com/cc8x) * [CC-WMX-JM7D-NN](https://www.digi.com/products/models/cc-wmx-jm7d-nn) * [CC-MX-JQ6D-ZN](https://www.digi.com/cc8x) * [CC-MX-JQ7D-ZN](https://www.digi.com/cc8x) * [CC-WMX-JQ7D-ZN](https://www.digi.com/cc8x) * ConnectCore 8X SBC Pro * [CC-WMX8-PRO](https://www.digi.com/products/embedded-systems/single-board-computers/digi-connectcore-8x-sbc-pro) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/5.0/cc8x/yocto-gs_index)) ## ConnectCore 6UL * ConnectCore 6UL System-on-Module (SOM) * [CC-WMX-JN7A-NE](https://www.digi.com/products/models/cc-wmx-jn7a-ne) * [CC-WMX-JN69-NN](https://www.digi.com/products/models/cc-wmx-jn69-nn) * [CC-WMX-JN59-NN](https://www.digi.com/products/models/cc-wmx-jn59-nn) * [CC-WMX-JN58-NE](https://www.digi.com/products/models/cc-wmx-jn58-ne) * [CC-MX-JN7A-Z1](https://www.digi.com/products/models/cc-mx-jn7a-z1) * [CC-MX-JN69-ZN](https://www.digi.com/products/models/cc-mx-jn69-zn) * [CC-MX-JN58-Z1](https://www.digi.com/products/models/cc-mx-jn58-z1) * ConnectCore 6UL SBC Pro * [CC-WMX6UL-KIT](https://www.digi.com/products/models/cc-wmx6ul-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/5.0/cc6ul/yocto-gs_index)) * [CC-SBP-WMX-JN58](https://www.digi.com/products/models/cc-sbp-wmx-jn58) * [CC-SBP-WMX-JN7A](https://www.digi.com/products/models/cc-sbp-wmx-jn7a) # Installation Digi Embedded Yocto is composed of a set of different Yocto layers that work in parallel. The layers are specified on a [manifest](https://github.com/digi-embedded/dey-manifest/blob/scarthgap/default.xml) file. To install, please follow the instructions at the dey-manifest [README](https://github.com/digi-embedded/dey-manifest) # Documentation Documentation is available online at https://www.digi.com/resources/documentation/digidocs/embedded/ # Downloads * Demo images: https://ftp1.digi.com/support/digiembeddedyocto/5.0/r1/images/ * Software Development Kit (SDK): https://ftp1.digi.com/support/digiembeddedyocto/5.0/r1/sdk/ # Release Changelog ## 5.0-r1 * Release based on [Yocto 5.0 (Scarthgap)](https://www.yoctoproject.org/software-overview/downloads) including: * New toolchain based on GLIBC-2.39 * Updated bluez5 to v5.72 * Updated busybox to v1.36.1 * Updated NetworkManager to v1.46.0 * Updated gstreamer1.0 to v1.22.12 * Updated OpenSSL to v3.2.3 * Package upgrades and security fixes * ST-based platforms * Added support to ConnectCore MP25 * Updated BSP * Updated Trusted Firmware ARM v2.10 (based on tag 'v2.10-stm32mp-r1' by ST) * Updated OP-TEE v4.0.0 (based on tag '4.0.0-stm32mp-r1' by ST) * Updated U-Boot v2023.10 (based on tag 'v2023.10-stm32mp-r1' by ST) * Updated Linux kernel v6.6.48 (based on tag 'v6.6-stm32mp-r1.1' by ST) * Updated Wifi driver (based on 'v6.1.97-2024_1115' release from Cypress) * Updated Wifi firmware to 'imx-scarthgap-jaculus_r1.0' release from Murata * NXP-based platforms * Added support to ConnectCore 6UL * Added support to ConnectCore 8X * Added support to ConnectCore 91 * Added support to ConnectCore 93 * Updated BSP * Updated U-Boot v2024.04 (based on tag 'lf-6.6.52-2.2.0' by NXP) * Updated Linux kernel v6.6.52 (based on tag 'lf-6.6.52-2.2.0' by NXP) # Known Issues and Limitations This is a list of known issues and limitations at the time of release. An updated list can be found on the online documentation. * Firmware update * The software update package must be located in the root level of the update media (subfolders are not yet supported). * Cloud Connector * Remote file system management fails with long file names and paths (over 255 characters). * Wireless * Performance of the wireless interface is reduced when using concurrent mode, as the wireless interface is shared between several different functionalities. * When using wireless concurrent mode, Digi recommends you keep the different modes on the same frequency channels. For example, when configuring access point mode on channel 36 in the 5GHz band, connect to the same channel both in station mode and Wi-Fi direct so that the radio performance is optimized. * When working as an access point, DFS-capable channels in the 5GHz band are not supported. * For P2P connections Digi recommends "Negotiated GO" modes. The QCA6564 devices fail to join autonomous groups. ## ConnectCore 93 * ConnectCore 93 System-on-Module (SOM) * Trustfence * It is not possible to close a device using U-Boot v2024.04 for Secure boot on a device with CPU revision A0. However, it is possible to boot v2024.04 signed images on an already closed device. ## ConnectCore 6UL * ConnectCore 6UL System-on-Module (SOM) * The UART connected to the Bluetooth chip on early versions of the ConnectCore 6UL system-on-module (hardware version < 4) cannot properly execute flow control. To work around this issue, UART1 of these SOM versions has been configured to operate at 115200 bps and without hardware flow control, reducing the maximum throughput of this interface. * The QCA6564 wireless chip does not support Wake On Wireless LAN. # Support Contact Information For support questions please contact Digi Technical Support: * [Enterprise Support](https://mydigi.secure.force.com/customers/) * [Product Technical Support](https://www.digi.com/support#support-tools) * [Support forum](https://www.digi.com/support/forum/) When you contact Digi Technical Support, include important system details and device information to help Digi resolve the issue more quickly. 1. In the device, run the command 'sysinfo'. This generates the following file: /tmp/<current timestamp>.txt.gz. 2. Attach the <current timestamp>.txt.gz file to your support ticket.