#!/bin/sh
#===============================================================================
#
#  Copyright (C) 2020-2024 by Digi International Inc.
#  All rights reserved.
#
#  This program is free software; you can redistribute it and/or modify it
#  under the terms of the GNU General Public License version 2 as published by
#  the Free Software Foundation.
#
#
#  Description:
#    Script to flash Yocto build artifacts over USB to the target.
#===============================================================================
# set -x

#
# U-Boot script for installing Linux images created by Yocto
#

# Exit on any error
set -e

# Parse uuu cmd output
getenv()
{
	uuu -v fb: ucmd printenv "${1}" | sed -ne "s,^${1}=,,g;T;p"
}

show_usage()
{
	echo "Usage: $0 [options]"
	echo ""
	echo "  Options:"
	echo "   -b                     Activate bootcount mechanism (3 boot attempts)."
	echo "   -d                     Install firmware on dualboot partitions (system A and system B)."
	echo "                          (Implies -b)."
	echo "   -h                     Show this help."
	echo "   -i <dey-image-name>    Image name that prefixes the image filenames, such as 'dey-image-qt', "
	echo "                          'dey-image-webkit', 'core-image-base'..."
	echo "                          Defaults to 'core-image-base' if not provided."
	echo "   -k <dek-filename>      Update includes dek file."
	echo "                          (implies -t)."
	echo "   -n                     No wait. Skips 10 seconds delay to stop script."
	echo "   -u <u-boot-filename>   U-Boot filename."
	echo "   -t                     Install TrustFence artifacts."
	echo "                          Auto-determined by variant if not provided."
	echo "   -U                     Update redundant bootloader partition."

	exit 2
}

# Update a partition
#   Params:
#	1. partition
#	2. file
#	3. dek file when updating an encrypted bootloader
part_update()
{
	echo "\033[36m"
	echo "====================================================================================="
	echo "Updating '${1}' partition with file: ${2}"
	echo "====================================================================================="
	echo "\033[0m"

	if [ "${TRUSTFENCE}" = "true" ] && [ "${1}" = "bootloader" ]; then
		uuu fb: download -f "${2}"
		if [ -n "${DEK_FILE}" ]; then
			uuu fb: ucmd setenv uboot_size \${filesize}
			uuu fb: ucmd setenv fastboot_buffer \${initrd_addr}
			uuu fb: download -f "${3}"
			uuu fb: ucmd setenv dek_size \${filesize}
			uuu fb: ucmd trustfence update ram \${loadaddr} \${uboot_size} \${initrd_addr} \${dek_size}
		else
			uuu fb: ucmd trustfence update ram \${fastboot_buffer} \${fastboot_bytes}
		fi
	else
		if [ "${1}" = "bootloader" ] || [ "${1}" = "bootloader_redundant" ]; then
			uuu fb: flash "${1}" "${2}"
		else
			uuu fb: flash -raw2sparse "${1}" "${2}"
		fi
	fi
}

clear
echo "############################################################"
echo "#           Linux firmware install through USB OTG         #"
echo "############################################################"

# Command line admits the following parameters:
# -b, -d, -n (booleans)
# -i <image-name>
# -u <u-boot-filename>
# -k <dek-filename>
while getopts ':bdhti:nu:Uk:' c
do
	if [ "${c}" = ":" ]; then
		c="${OPTARG}"
		unset OPTARG
	elif echo "${OPTARG}" | grep -qs '^-'; then
		OPTIND="$((OPTIND-1))"
		unset OPTARG
	fi
	case $c in
	b) BOOTCOUNT=true ;;
	d) INSTALL_DUALBOOT=true && BOOTCOUNT=true ;;
	h) show_usage ;;
	i) IMAGE_NAME=${OPTARG} ;;
	k) DEK_FILE=${OPTARG} && TRUSTFENCE=true ;;
	n) NOWAIT=true ;;
	u) INSTALL_UBOOT_FILENAME=${OPTARG} ;;
	t) TRUSTFENCE=true ;;
	U) INSTALL_REDUNDANT_UBOOT=true ;;
	esac
done

# Enable the redirect support to get u-boot variables values
uuu fb: ucmd setenv stdout serial,fastboot

# Check if dualboot variable is active
dualboot=$(getenv "dualboot")
if [ "${dualboot}" = "yes" ]; then
	DUALBOOT=true;
fi

echo ""
echo "Determining image files to use..."

# Determine U-Boot file to program basing on SOM's SOC revision
if [ -z "${INSTALL_UBOOT_FILENAME}" ]; then
	soc_type="$(getenv soc_type)"
	if [ "${soc_type}" = "imx93" ]; then
		soc_rev="$(getenv soc_rev)"
		if [ -n "${soc_rev}" ]; then
			[ "${soc_rev}" = "0x10" ] && SOCREV="-A0"
		else
			# Fallback to hardware version if soc_rev is empty
			hwid_2="$(getenv hwid_2)"
			hwid_2="0x${hwid_2#0x}"
			som_hv="$(((hwid_2 & 0x78) >> 3))"
			[ "${som_hv}" -lt "2" ] && SOCREV="-A0"
		fi
	fi
	INSTALL_UBOOT_FILENAME="imx-boot-ccimx91-dvk${SOCREV}.bin"
fi

# remove redirect
uuu fb: ucmd setenv stdout serial

# Determine linux, recovery, and rootfs image filenames to update
if [ -z "${IMAGE_NAME}" ]; then
	IMAGE_NAME="core-image-base"
fi
GRAPHICAL_IMAGES="dey-image-qt dey-image-webkit dey-image-lvgl"
for g in ${GRAPHICAL_IMAGES}; do
	if [ "${IMAGE_NAME}" = "${g}" ]; then
		BASEFILENAME="${IMAGE_NAME}-fb"
	fi
done
if [ -z "${BASEFILENAME}" ]; then
	BASEFILENAME="${IMAGE_NAME}"
fi
INSTALL_LINUX_FILENAME="${BASEFILENAME}-ccimx91-dvk.boot.vfat"
INSTALL_RECOVERY_FILENAME="${BASEFILENAME}-ccimx91-dvk.recovery.vfat"
INSTALL_ROOTFS_FILENAME="${BASEFILENAME}-ccimx91-dvk.ext4"

COMPRESSED_ROOTFS_IMAGE="${INSTALL_ROOTFS_FILENAME}.gz"

# If the rootfs image is compressed, make sure to decompress it before the update
if [ -f ${COMPRESSED_ROOTFS_IMAGE} ] && [ ! -f ${INSTALL_ROOTFS_FILENAME} ]; then
	echo "\033[36m"
	echo "====================================================================================="
	echo "Decompressing rootfs image '${COMPRESSED_ROOTFS_IMAGE}'"
	echo "====================================================================================="
	echo "\033[0m"
	gzip -d -k -f "${COMPRESSED_ROOTFS_IMAGE}"
fi

# Verify existence of files before starting the update
FILES="${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME}"
if [ "${DUALBOOT}" != true ]; then
	FILES="${FILES} ${INSTALL_RECOVERY_FILENAME}"
fi
for f in ${FILES}; do
	if [ ! -f ${f} ]; then
		echo "\033[31m[ERROR] Could not find file '${f}'\033[0m"
		ABORT=true
	fi
done;

# Verify what kind of rootfs is going to be programmed
if [ ! -f ${INSTALL_ROOTFS_FILENAME} ]; then
	echo "\033[31m[ERROR] Could not find file '${INSTALL_ROOTFS_FILENAME}'\033[0m"
	INSTALL_ROOTFS_FILENAME="${BASEFILENAME}-ccimx91-dvk.squashfs"
	echo "\033[32m[INFO] Trying with file '${INSTALL_ROOTFS_FILENAME}'\033[0m"
	if [ ! -f "${INSTALL_ROOTFS_FILENAME}" ]; then
		echo "\033[31m[ERROR] Could not find file '${INSTALL_ROOTFS_FILENAME}'\033[0m"
		ABORT=true
	fi
fi

[ "${ABORT}" = true ] && exit 1

# Enable bootcount mechanism by setting a bootlimit
if [ "${BOOTCOUNT}" = true ]; then
	bootlimit_cmd="setenv bootlimit 3"
fi

# parts names
LINUX_NAME="linux"
RECOVERY_NAME="recovery"
ROOTFS_NAME="rootfs"
# Print warning about storage media being deleted
if [ "${NOWAIT}" != true ]; then
	WAIT=10
	printf "\n"
	printf " ====================\n"
	printf " =    IMPORTANT!    =\n"
	printf " ====================\n"
	printf " This process will erase your eMMC and will install the following files\n"
	printf " on the partitions of the eMMC.\n"
	printf "\n"
	printf "   PARTITION\tFILENAME\n"
	printf "   ---------\t--------\n"
	printf "   bootloader\t${INSTALL_UBOOT_FILENAME}\n"
	if [ "${INSTALL_REDUNDANT_UBOOT}" = true ]; then
		printf "   bootloader_redundant\t${INSTALL_UBOOT_FILENAME}\n"
	fi
	if [ "${DUALBOOT}" = true ]; then
		printf "   ${LINUX_NAME}_a\t${INSTALL_LINUX_FILENAME}\n"
		if [ "${INSTALL_DUALBOOT}" = true ]; then
			printf "   ${LINUX_NAME}_b\t${INSTALL_LINUX_FILENAME}\n"
		fi
		printf "   ${ROOTFS_NAME}_a\t${INSTALL_ROOTFS_FILENAME}\n"
		if [ "${INSTALL_DUALBOOT}" = true ]; then
			printf "   ${ROOTFS_NAME}_b\t${INSTALL_ROOTFS_FILENAME}\n"
		fi
	else
		printf "   ${LINUX_NAME}\t${INSTALL_LINUX_FILENAME}\n"
		printf "   ${RECOVERY_NAME}\t${INSTALL_RECOVERY_FILENAME}\n"
		printf "   ${ROOTFS_NAME}\t${INSTALL_ROOTFS_FILENAME}\n"
	fi
	printf "\n"
	printf " Press CTRL+C now if you wish to abort.\n"
	printf "\n"
	while [ ${WAIT} -gt 0 ]; do
		printf "\r Update process starts in %d " ${WAIT}
		sleep 1
		WAIT=$(( ${WAIT} - 1 ))
	done
	printf "\r                                   \n"
	printf " Starting update process\n"
fi

# Set fastboot buffer address to $loadaddr, just in case
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}

# Skip user confirmation for U-Boot update
uuu fb: ucmd setenv forced_update 1

# Update U-Boot
part_update "bootloader" "${INSTALL_UBOOT_FILENAME}" "${DEK_FILE}"
if [ "${INSTALL_REDUNDANT_UBOOT}" = true ]; then
	part_update bootloader_redundant "${INSTALL_UBOOT_FILENAME}"
fi

# Set MMC to boot from BOOT1 partition
uuu fb: ucmd mmc partconf 0 1 1 1

# Set 'bootcmd' for the second part of the script that will
#  - Reset environment to defaults
#  - Reset the bootcount
#  - Set bootlimit (if required)
#  - Save the environment
#  - Partition the eMMC user data area for Linux
#  - Update the 'linux' partition
#  - Update the 'recovery' partition
#  - Update the 'rootfs' partition
uuu fb: ucmd setenv bootcmd "
	env default -a;
	setenv dualboot \${dualboot};
	bootcount reset;
	${bootlimit_cmd};
	saveenv;
	echo \"\";
	echo \"\";
	echo \">> Creating Linux partition table on the eMMC\";
	echo \"\";
	echo \"\";
	run partition_mmc_linux;
	if test \$? -eq 1; then
		echo \"[ERROR] Failed to create Linux partition table!\";
		echo \"\";
		echo \"Aborted.\";
		exit;
	fi;
	echo \"\";
	echo \"\";
	echo \">> Start installation Linux firmware files\";
	echo \"\";
	echo \"\";
	saveenv;
	fastboot 0;
"

uuu fb: ucmd saveenv
uuu fb: acmd reset

# Wait for the target to reset
sleep 3

# Restart fastboot with the latest MMC partition configuration
uuu fb: ucmd setenv fastboot_dev sata
uuu fb: ucmd setenv fastboot_dev mmc

# Set fastboot buffer address to $loadaddr, just in case
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}

if [ "${DUALBOOT}" = true ]; then
	# Update Linux A
	part_update "${LINUX_NAME}_a" "${INSTALL_LINUX_FILENAME}"
	# Update Linux B
	if [ "${INSTALL_DUALBOOT}" = true ]; then
		part_update "${LINUX_NAME}_b" "${INSTALL_LINUX_FILENAME}"
	fi
	# Update Rootfs A
	part_update "${ROOTFS_NAME}_a" "${INSTALL_ROOTFS_FILENAME}"
	# Update Rootfs B
	if [ "${INSTALL_DUALBOOT}" = true ]; then
		part_update "${ROOTFS_NAME}_b" "${INSTALL_ROOTFS_FILENAME}"
	fi
else
	# Update Linux
	part_update "${LINUX_NAME}" "${INSTALL_LINUX_FILENAME}"
	# Update Recovery
	part_update "${RECOVERY_NAME}" "${INSTALL_RECOVERY_FILENAME}"
	# Update Rootfs
	part_update "${ROOTFS_NAME}" "${INSTALL_ROOTFS_FILENAME}"
fi

# If the rootfs image was originally compressed, remove the uncompressed image
if [ -f ${COMPRESSED_ROOTFS_IMAGE} ] && [ -f ${INSTALL_ROOTFS_FILENAME} ]; then
	rm -f "${INSTALL_ROOTFS_FILENAME}"
fi
# Set the dboot_kernel_var to fitimage if Trustfence is enabled
if [ "${TRUSTFENCE}" = "true" ] || echo "$INSTALL_UBOOT_FILENAME" | grep -q -e "signed" -e "encrypted"; then
	uuu fb: ucmd setenv dboot_kernel_var fitimage
fi

if [ "${DUALBOOT}" != true ]; then
	# Configure u-boot to boot into recovery mode
	uuu fb: ucmd setenv boot_recovery yes
	uuu fb: ucmd setenv recovery_command wipe_update
fi
uuu fb: ucmd saveenv

# Reset the bootcount
uuu fb: ucmd bootcount reset
# Reset the target
uuu fb: acmd reset

echo "\033[32m"
echo "============================================================="
echo "Done! Wait for the target to complete first boot process."
echo "============================================================="
echo "\033[0m"

exit
