See releasenotes.txt in the Dynamic C root directory 
for more details.

       DYNAMIC C 7.33P3 PREMIER RELEASE HIGHLIGHTS 

FUNCTIONAL CHANGES

Added support for BL2500 with RCM3200 core module
option.

Added support for EG2110 Rabbit Link.



       DYNAMIC C 7.33 PREMIER RELEASE HIGHLIGHTS 

NEW FEATURES

Samples, libraries, and documentation for new
RCM3400 core module added.


Samples, libraries, and documentation for new
BL2500 added.



       DYNAMIC C 7.32 PREMIER RELEASE HIGHLIGHTS 

NEW FEATURES

New Download Manager Sample Programs -- One for 
single 256K byte flash boards added, and one 
using FTP instead of RS232.

Separate Instruction and Data space - The 
compiler can now take advantage of an MMU feature 
available on Rabbit 2000A and later chips that 
effectively doubles the root memory space available.

Simple Network Management Protocol (SNMP) --
Implements SNMP v1 basic protocol (using UDP as 
transport machanism) plus a database for the MIB 
tree. (Dynamic C Premier only)

TCP/IP Multicasting Support -- For IGMPv1 and 
IGMPv2. This allows Internet enabled Rabbit 
products to send packets with multiple 
destinations.

Ethernet packet driver support added for
SMSC LAN91C113 10/100 and ASIX AX88796 10/100.

TCP/IP Multiple Interface Support -- Allows
simultaneous use of multiple Ethernet ports 
or Ethernet and PPP.

Samples, libraries, and documentation for new
RCM3200 core module added.

Samples, libraries, and documentation for new
OP7200 controller with QVGA added.

Extended memory data handling functions added.

OTHER IMPROVEMENTS

General TCP/IP Improvements -- Includes:
  * Congestion avoidance improvements
  * Significantly faster transmission.
  * ARP now handles ICMP redirect messages
  * ...and more

Significant speed-ups to compiling and 
downloading

            DYNAMIC C 7.26 RELEASE HIGHLIGHTS 

Samples, libraries, and documentation for the new 
LP3500 series and BL2000, BL2100, OP6800 and SmartStar
series controllers added.


Improvements to target communication robustness.

            DYNAMIC C 7.25 RELEASE HIGHLIGHTS 

Samples, libraries, and documentation for new  RCM3000 core 
module added.

STDIO output can now be directed to a serial port for 
debugging under run mode.

The baud rate used for downloading is now negotiated between 
the PC and the target. This may speed up downloading, 
particularly if a USB converter is used where rates up to 
460800 baud are possible.

The baud rates for debugging with the BIOS have been expanded 
from 57600 and 115200 to 9600, 19200, 38400, 57600, and 
115200. This aids in debugging with user designed boards with 
slower crystals.

Dynamic C now works with a wider selection of USB to RS232 
converters. The quality of drivers for converters varies 
widely, and Dynamic C attempts to compensate for these 
differences.

Support was added for more large-sector flash products.

Alt+F7 and Alt+F8 can now force the debugger to step by c 
statements rather than  by instruction when the assembly 
window is open. (Introduced in 7.10).

-------------------------------------------------
            DYNAMIC C 7.21 RELEASE HIGHLIGHTS 

Root memory usage reduction in BIOS and libraries.

Tech Note 219 - Root memory usage reduction tips added.

uC/OS-II release notes from Jean Labrosse added

-------------------------------------------------
            DYNAMIC C 7.20 RELEASE HIGHLIGHTS 

NEW FEATURES 

Project Files - Project files facilitate working on multiple 
Dynamic C projects. Project level information such as compiler 
options, libraries used, files open, and project scope #define
macros can now be saved in project files. Use the project 
command on the file menu.

Support for Enums - Dynamic C now supports the standard 
intrinsic enum type.

Precompilation - Functions can be listed in the file 
precompile.lib to save recompiling them every time. 

µC/OS-II Upgrade - The Rabbit/Dynamic C port of Jean 
Labrosse’s popular real-time operating system for embedded 
systems, µC/OS-II, has been upgraded to version 2.51. New 
features include mutex semaphores and event flags. µC/OS-II 
for Rabbit is available only in Dynamic Premier, and may 
be used license and royalty free in end products.

TCP/IP Improvements - Many improvements to the robustness 
and performance of the TCP/IP stack have been made. (Most 
of these were introduced in version 7.06P2) See 
releasenotes.txt in the Dynamic C root directory for 
details.

Command Line RFU Version - A GUI-less Rabbit Field Utility 
for loading programs without Dynamic C is now available.
  
Clear All Breakpoints Command - A command on the Run menu to 
remove all breakpoints at once has been added.

New System Macros - __LINE__, __FILE__, __DATE__, __TIME__  
compiler defined macros have been added. 

Library encryption - A utility program that is not released 
with Dynamic C, but is available from Z-World Tech Support will 
encrypt libraries in a format that  Dynamic C can decrypt. This 
is primarily of interest to people who want to make arrangements 
with Z-World to resell Dynamic C as a programming tool for a 
programmable end product.

OTHER FUNCTIONAL IMPROVEMENTS

Faster Debugging - Single stepping through code and printf are 
now noticeably faster.

Large Sector Flash Support - Dynamic C now Supports a larger 
variety of flash types, including several very-large , 
non-uniform sector size types. This change required some 
fundamental changes in the way the debugger interacts with the 
target. Single-stepping and breakpoint setting used to cause 
flash writes to occur. This no longer happens.

Faster, More Flexible Cloning - Cloning is a feature that 
allows one Rabbit target to copy itself to another using a 
special cloning board available from Z-World. (The simple 
circuit is easily designed into board test fixtures.) Previously, 
a "fast" cloning option was available but had some 
restrictions. Now, all cloning is fast (up to 921.6 kbaud), and 
options have been added for: creating "sterile" clones, copying 
the User and System ID blocks, running after copying, copying a 
second flash, and more. See the cloning configuration options 
near the top of rabbitbios.c or the Rabbit 2000 Designer’s 
Handbook.

Constant String Optimization - If an identical literal string is 
defined in code multiple times, only one instance of it will be 
generated and used.

OTHER IMPORTANT FUNCTIONAL CHANGES

Assembly level debugging - Previously, #asm blocks embedded in C 
functions took on the "debug/nodebug" characteristic of that C 
function. The #asm directive to begin an assembly block now can 
take a "debug" or "nodebug" keyword, and the default is nodebug, 
regardless of the how the C function is declared. This means that 
a breakpoint can not be set inside an #asm block unless 
"#asm debug" is explicitly used. Due to the changes to support 
large sector flash, using debug on the assembly block now causes 
RST 28Hs to be placed in between instructions so that breakpoints 
may be set. This may have the side effect of making short jump 
instructions out of range (an assembler error message will be 
generated). This can be fixed by changing jr to jp, and will not 
break pre-existing code since the debug keyword was not usable 
with #asm before. Nodebug Assembly blocks may still be 
single-stepped through in the disassembly window.

Targetless Compilation - Compiling with "Use Attached Target" no 
longer compiles the bios, and requires that the target have a 
running bios/program. The Options menu now has a "Define Target 
Configuration Command." The "Compile to *.bin file" command now 
uses the target configuration defined in the new option to compile, 
instead of popping the Target Configuration Dialog up for every 
compilation.

RabbitLink Changes - The RabbitLink has had a major overhaul in 
Dynamic C 7.20 to bring it in sync with the Ethernet Loading 
utility of the DeviceMate, to allow for future compatibility, 
and to allow pure-Ethernet loading, without ever needing a serial 
port, through the use of DHCP. Because of this overhaul, it will 
be necessary to upgrade the firmware on the RabbitLink hardware 
for it to be able to communicate with Dynamic C 7.20 or later. 
The New RabbitLink firmware has the flexibility to allow for 
future changes in communication method between the Dynamic C and 
the target and avoid future incompatibilities.



