Digi XBee Studio Release Notes (PN 93001372_E) Build 1.3.0.6 December 19, 2025 (c) Digi International Inc. 2025 https://www.digi.com Introduction ---------------------------------------------------------------------- This document provides the latest release information for XBee Studio, the configuration and testing tool for Digi International Inc. XBee modules. XBee Studio 1.3.0, December 2025 ---------------------------------------------------------------------- 1. Changes with respect to previous version * Support for the following Digi XBee RF modules: * Digi XBee PRO XR 900 * Digi XBee LPX 900 SMT * Digi XBee SX 868 * Digi XBee SX 900 * Digi XBee PRO SX * Digi XBee Wi-SUN * Support for Digi XBee Hive Wi-SUN * Minor bug fixes and improvements See the Change log within XBee Studio for more information. 2. Supported Operating Systems XBee Studio currently supports the following Operating Systems: * Microsoft Windows 7 or later (64-bit versions) * macOS 10.14 or later (64-bit Intel processors) * Linux with Gnome or KDE (64-bit versions) For additional information about the system requirements, refer to the built-in documentation. 3. Known Issues and Limitations * UNIX-based operating systems allow you to open multiple instances of the same port. This scenario can produce unexpected behaviors if you have the same port open simultaneously by different apps in Linux. * Cellular modem update over USB only works in Windows. In addition, it requires that the appropriate USB drivers are installed on the computer and the usage of either a Digi XBIB-CU-TH development board or your own hardware that makes a USB port available to the PC. XBee Studio 1.2.0, March 2025 ---------------------------------------------------------------------- 1. Changes with respect to previous version * Support for the following Digi XBee RF modules: * Digi XBee LPX 900 * Digi XBee LR Module for LoRaWAN * Minor bug fixes and improvements See the Change log within XBee Studio for more information. 2. Supported Operating Systems XBee Studio currently supports the following Operating Systems: * Microsoft Windows 7 or later (64-bit versions) * macOS 10.14 or later (64-bit Intel processors) * Linux with Gnome or KDE (64-bit versions) For additional information about the system requirements, refer to the built-in documentation. 3. Known Issues and Limitations * UNIX-based operating systems allow you to open multiple instances of the same port. This scenario can produce unexpected behaviors if you have the same port open simultaneously by different apps in Linux. * Cellular modem update over USB only works in Windows. In addition, it requires that the appropriate USB drivers are installed on the computer and the usage of either a Digi XBIB-CU-TH development board or your own hardware that makes a USB port available to the PC. XBee Studio 1.1.1, October 2024 ---------------------------------------------------------------------- 1. Changes with respect to previous version * Support for the following Digi XBee RF modules: * Digi XBee XR 868 * Digi XBee XR 900 * Minor bug fixes and improvements See the Change log within XBee Studio for more information. 2. Supported Operating Systems XBee Studio currently supports the following Operating Systems: * Microsoft Windows 7 or later (64-bit versions) * macOS 10.14 or later (64-bit Intel processors) * Linux with Gnome or KDE (64-bit versions) For additional information about the system requirements, refer to the built-in documentation. 3. Known Issues and Limitations * UNIX-based operating systems allow you to open multiple instances of the same port. This scenario can produce unexpected behaviors if you have the same port open simultaneously by different apps in Linux. * Cellular modem update over USB only works in Windows. In addition, it requires that the appropriate USB drivers are installed on the computer and the usage of either a Digi XBIB-CU-TH development board or your own hardware that makes a USB port available to the PC. * The map layout in cloud view is not supported in macOS. XBee Studio 1.1.0, February 2024 ---------------------------------------------------------------------- 1. Changes with respect to previous version * Support for the following Digi XBee RF modules: * Digi XBee 3 Zigbee 3 * Digi XBee 3 DigiMesh 2.4 * Digi XBee 3 802.15.4 * Digi XBee RR Zigbee * Digi XBee RR DigiMesh 2.4 * Digi XBee RR 802.15.4 * Digi XBee BLU * New tools to perform diagnostic tests with XBee 3 RF devices: * Range Test to evaluate the RF range and link quality between two devices. * Spectrum Analyzer to measure the spectrum of any RF band. * Throughput Test to measure the transfer ratio between two devices. * New network view to visualize the topology of RF networks, displaying all network nodes and connections graphically or in a table, as well as to configure and update any remote node of the network. * Minor bug fixes and improvements See the Change log within XBee Studio for more information. 2. Supported Operating Systems XBee Studio currently supports the following Operating Systems: * Microsoft Windows 7 or later (64-bit versions) * macOS 10.14 or later (64-bit Intel processors) * Linux with Gnome or KDE (64-bit versions) For additional information about the system requirements, refer to the built-in documentation. 3. Known Issues and Limitations * UNIX-based operating systems allow you to open multiple instances of the same port. This scenario can produce unexpected behaviors if you have the same port open simultaneously by different apps in Linux. * Cellular modem update over USB only works in Windows. In addition, it requires that the appropriate USB drivers are installed on the computer and the usage of either a Digi XBIB-CU-TH development board or your own hardware that makes a USB port available to the PC. * The map layout in cloud view is not supported in macOS. XBee Studio 1.0.1, March 2023 ---------------------------------------------------------------------- 1. Changes with respect to previous version * First release of XBee Studio. 2. Supported Operating Systems XBee Studio currently supports the following Operating Systems: * Microsoft Windows 7 or later (64-bit versions) * macOS 10.14 or later (64-bit Intel processors) * Linux with Gnome or KDE (64-bit versions) For additional information about the system requirements, refer to the built-in documentation. 3. Known Issues and Limitations * At the moment XBee Studio only supports XBee 3 Cellular devices. * UNIX-based operating systems allow you to open multiple instances of the same port. This scenario can produce unexpected behaviors if you have the same port open simultaneously by different apps in Linux. * Cellular modem update over USB only works in Windows. In addition, it requires that the appropriate USB drivers are installed on the computer and the usage of either a Digi XBIB-CU-TH development board or your own hardware that makes a USB port available to the PC.