Release Notes  PN 93000395

           Digi Neo and ClassicBoard PCI Device Driver
                          Version 1.0.1

                      Windows 95, 98 and Me

                   Software Package PN 40002124
 
                          20 April 2001


CONTENTS

Section  Description
1        Introduction
2        Supported Products
3        Known Limitations
4        Additional Notes
5        Release History

1. INTRODUCTION
    
    This document describes the Digi Neo and ClassicBoard PCI
    Device Driver for Windows 95, 98, and Me.

2. SUPPORTED PRODUCTS

    Digi Neo 4
    Digi Neo 8
    Digi ClassicBoard 4 PCI
    Digi ClassicBoard 8 PCI
    Digi ClassicBoard 16 PCI

3. KNOWN LIMITATIONS

    Multiple applications may not access COM ports simultaneously,
    and Windows may terminate any application that attempts to do 
    so.  For example, if one prints using one COM port and dials-out
    using another COM port, either the print application or the 
    Dial-up Networking application will be terminated.  This issue
    is being addressed and an updated driver will be posted to
    Digi's FTP site when available.

4. ADDITIONAL NOTES

    On-line help is available through the Device Manager:

    1.  From the Start menu, choose Settings > Control Panel > 
        System > Device Manager.  View devices by type should 
        already have been selected by default.
    2.  Expand the Multi-port Serial Cards category (click on 
        the plus-in-the-box to expand the list of serial cards).
    3.  Highlight a Digi card and choose Properties.
    4.  Select the Port Configuration tab; then, choose Help.

    Installation documentation can be found at Digi's Web site, 
    http://www.digi.com, or at Digi's FTP server, ftp://ftp.digi.com.

5. RELEASE HISTORY

	Version 1.0.1
	20 April 2001 -- Initial product release.