Release Notes PN 93000399_G1P
		Digi One Realport, PortServer TS 2/4 EOS
				Digi One IA

				82000716_D1P

				March 18, 2002

WARNING: When upgrading from a release prior to 82000716B, the POST
must be upgraded before upgrading to the new version of the OS. See
ADDITIONAL INFORMATION

INTRODUCTION

This is a beta release of firmware for the Digi One Realport/IA and 
PortServer TS 2/4.  
 
SUPPORTED PRODUCTS

    Digi One Realport
    Digi One IA
    PortServer TS 2
    PortServer TS 4

ENHANCEMENTS

The D1P release adds support for PPP, Ping/ARP, 
Force DCD option (auto connect 3-wire), User Data, and Advanced Discovery.
    
The D1P release contains some latency enhancements in the Digi One IA device, 
and PortServer TS 2.

MANUAL ERRATA

     not applicable

BUG FIXES
	
	SNMP CERT - vantive field tracking #8175 and #8161
		
KNOWN LIMITATIONS

     not applicable

ADDITIONAL INFORMATION 

The beta firmware and release notes are located at ftp://ftp.digi.com/support/beta/firmware/dg1rp-ts2/

The release notes for Advanced Discovery are located at ftp://ftp.digi.com/support/beta/utilities/dpar/

A TFTP server will be required for the following steps:

Upgrading the POST and EOS
--------------------------

When upgrading from a release prior to 82000716B, the POST must be upgraded 
before upgrading to the new version of the OS. The 82000679C1 release is located at ftp://ftp.digi.com/support/firmware/dg1rp-ts2/. This can be done from the OS 
with the command:

  boot load-post=<tftpserver>:82000679C1.bin

A reset is necessary to allow the new POST to run.

  boot action=reset

Upgrade the EOS with the command:

  boot load=<tftpserver>:82000716D1P.bin

The unit should be reset after the EOS upgrade as well.


---------------------------

Running and Interpreting Digi One Realport PortServer TS 2/4 POST

	(Corrects the Table of LED Activity and indication.)
	
The Power-On/Status LED will flicker at a very fast rate while the Power-
On-Self-Tests are run.  This will take about 6 seconds from when the power 
is applied.  Once the tests are completed, a three-digit status-code is 
flashed on the LED, then the LED is turned on and the device is operational.

	
HISTORY

    2002-03-18
        82000716D1P
    
    2002-01-28
	82000716C

    2002-01-16
	82000716B

    2001-12-04
	82000677A4

    2001-10-29
	82000677A3
    
    2001-09-20
	82000677A1

    2001-07-11
	Beta Release 1P