ETHERLITE REALPORT DRIVER INSTALLATION UNDER WINDOWS 2000

1. Go to Control Panel and select the Add/Remove Hardware Wizard (see Figure 1).
   
                                                                                                                     Figure 1
2. Click Next.
   
   
3. Select the option to Add/Troubleshoot a device (see Figure 2).  Click Next.
   
                                                                                                                    Figure 2

   4.    Select the option to Add a new device (see Figure 3).  Click Next.
         
                                                                                                                           Figure 3

    5.    Select the option to choose hardware from a list (see Figure 4).  Click Next.
          
                                                                                                                            Figure 4

    6.    Select Multi-port Serial Adapter from the list of Hardware Types (see Figure 5).
           Click Next.
           
                                                                                                                              Figure 5

    8.    You can type in the path to the driver or browse to the location you have extracted it.
           You can select either Digirp or Digirprt (see Figure 6) and select Open.
          
                                                                                                          Figure 6

    9.    From the driver listing, select Digi EtherLite (see Figure 7) and click Next.
          
                                                                                                                            Figure 7

   10.    It will find the Digi EtherLite (see Figure 8).  Click Next.
               
                                                                                                                             Figure 8

   11.   It will come back warning you the driver is not digitally signed (see Figure 9).  Click Yes.
           
                                                                                                              Figure 9

   12.    You will need to configure an IP address for the EtherLite before loading the driver.
             If you have not already done so, select the DgIpServ button and step through the
             Store IP Settings wizard.  After you have finished assigning the IP address, you will come
             back to this screen (see Figure 10).  Enter the IP address you assigned to the EtherLite.
             NOTE: Leave the TCP port set to 771
           
                                                                                                                Figure 10

   13.   Give the EtherLite a name and specify the number of ports you want to add (see Figure 11).
           
                                                                                                                Figure 11

   14.   You should now get the EtherLite configuration screen showing the com ports the EtherLite will be assigned (see Figure 12).
           
                                                                                                                Figure 12

   15.    Click Finish.

   16.    Your EtherLite should now show up under Device Manger, Multi-port Serial Adapters and the com ports added under Ports.