How do you enable RealPort in the XC-35?

Solution:

There are two ways of enabling RealPort in the XC-35.

Via the Web: 
    1) Go to Advanced Configuration.
    2) Select serial port and set the serial mode to RealPort for the port (i.e. port 2).
    3) Click OK and SAVE.
    4) Go to Diagnostics.
    5) Select RealPort.
    6) Click on the option to enable service.
    7) Click on reset and SAVE.
Now you can install RealPort and configure RealPort driver .

Via a Telnet Connection: 
1.) Telnet into the XC-35.
2.) RealPort enable
3.) RealPort reset
4.) Serial mode realport 2 (this will set serial port 2 to RealPort mode)."
5.) Reset serial 2.
6.) SAVE
Now you can install RealPort and configure RealPort driver