1. Go to Control Panel and select the Add/Remove Hardware Wizard (see Figure 1).
   
                                                                                                                    
2. Click Next.
   
   
3. Select the option to Add/Troubleshoot a device (see Figure 2).  Click Next.
   
                                                                                                        

   4.    Select the option to Add a new device (see Figure 3).  Click Next.
         
                                                                                                         

    5.    Select the option to choose hardware from a list (see Figure 4).  Click Next.
          
                                                                                                                        

    6.    Select Multi-port Serial Adapter from the list of Hardware Types (see Figure 5).
           Click Next.
           
                                                                                                                              

    8.    You can type in the path to the driver or browse to the location you have 
           extracted it.  You can select either Digirp or Digirprt (see Figure 6) and select 
           Open.
          
                                                                                           

    9.    From the driver listing, select Digi EtherLite (see Figure 7) and click Next.
          
                                                                                                                

   10.    It will find the Digi EtherLite (see Figure 8).  Click Next.
               
                                                                                                        

   11.   It will come back warning you the driver is not digitally signed 
           (see Figure 9).  Click Yes.
           
                                                                                                   

   12.    You will need to configure an IP address for the EtherLite before loading 
            the driver.  If you have not already done so, select the DgIpServ button 
            and step through the Store IP Settings wizard.  After you have finished 
            assigning the IP address, you will come back to this screen (see Figure 10).  
            Enter the IP address you assigned to the EtherLite.
             NOTE: Leave the TCP port set to 771
           
                                                                                                        

   13.   Give the EtherLite a name and specify the number of ports you want 
           to add (see Figure 11).
           
                                                                                                            

   14.   You should now get the EtherLite configuration screen showing the com 
           ports the EtherLite will be assigned (see Figure 12).
           
                                                                                                            

   15.    Click Finish.

   16.    Your EtherLite should now show up under Device Manger, Multi-port 
            Serial Adapters and the com ports added under Ports.