Digi One TS and PortServer TS 2/4/8/16 Firmware Upgrade via the WebUI in a Microsoft Windows Operating System


	Technical Support Drivers Firmware Upgrades FAQs Product Documentation Cabling Support Tools Legacy Products About Digi Support Knowledge Base Online Support Request FTP Site Related Links Inside Out Networks

Home > Support >kbase >

Digi One TS and PortServer TS 2/4/8/16 Firmware Upgrade via the WebUI in a Microsoft Windows Operating System Digi One TS and PortServer TS 2/4/8/16 Firmware Upgrade via the WebUI in a Microsoft Windows Operating System

1. Download the current firmware for your PortServer TS product. This can be downloaded from the following link:
http://ftp.digi.com/support/firmware/index.html. Select your PortServer TS product from the list and download the firmware image.
NOTE: This is only with the PortServer TS products.

2. In the address field of your browser, enter the IP Address of the PortServer TS and press Enter.

3. Log into the PortServer TS. The default User Name is: root and Password: dbps.

Figure 2

4. At the Information page under Configure, choose Admin in the left hand column.



5. To upgrade the firmware from your web browser, select the HTTP Upgrade option.

6. Browse to the location where you have downloaded the Firmware and click Submit.

7.    You will get a confirmation that the image looks valid for your PortServer TS..
      NOTE: You will need to reboot the PortServer TS for the changes to take affect so click on the Reboot button.

8.   The PortServer TS will now reboot (see Figure 6).

9. Let the unit reboot and load the firmware image.

10. It should attempt to reconnect you to the PortServer TS. If not, log back in and on the Information page under
Firmware Version, you can verify the firmware has been upgraded, by checking the version.

Related Information:

http://supportold.digi.com/support/firmware/index.html