|
PCI Adapters in Novell NetWare PCI Adapters in Novell NetWare
Problem:
The following error message is displayed after loading
NBI.NLM:
WARNING: This version of NetWare does not support protected mode BIOS
accesses. Without a loader patch some PCI drivers may fail.
Solution:
The NetWare driver version 3.x for the DataFire Basic is
using NetWare Bus Interface (NBI) in order to use the basic PCI environment
functions. In some cases, problems may occur with the DataFire Basic PCI
configuration using Ixinstal.
The major advantage of NBI is that a standard interface
is used, which is provided by Novell. However, this means that the
complete PCI functionality depends on this central interface module, which
requires an up-to-date version on NetWare.
If NetWare Bus Interface (NBI) runs in a system
environment, which does not correspond to the underlying patch specifications,
after loading NBI.NLM, the following error message is displayed:
WARNING: This version of NetWare does not support protected mode BIOS
accesses. Without a loader patch some PCI drivers may fail.
If the adapter is detected incorrectly, reinstalling the
relevant NetWare patches should resolve this.
NOTE: Make sure that on the different NetWare
platforms (3.x, 4.x), the APPROPRIATE version of NBI.NLM is being used.
|