|
Dialing out with the AccelePort RAS on an analog line with voicemail results in a "No Dialtone" error. Dialing out with the AccelePort RAS on an analog line with voicemail results in a "No Dialtone" error.
Symptom:
When you try dialing out on an analog line that has voicemail tied to it, the AccelePort RAS will not recognize the initial tone you get indicating a voicemail message and will report "No Dialtone".
Cause:
The AccelePort RAS is looking for the standard
dial tone and because of the initial difference in tones isn't able to determine that a phone line is connected.
Solution:
You will have to add an X3 before the dial
string to inform the AccelePort RAS not to look for a dial tone.
For example, to make an outbound call with Hyperterminal you would type:
AT X3 DT5551212
NOTE: You can also download the AT Command set at: http://supportold.digi.com/support/drivers/winnt/9000120A.pdf
|
