|
How can I tell if the Digi driver has loaded in Windows NT? How can I tell if the Digi driver has loaded in Windows NT? Symptom:Driver loaded in NT?
Cause:No communication with the digi ports. Solutions:
First, verify that there are no event viewer errors in the system log that reference Digi.
By looking under Control Panel> Ports, you should see all of the Digi ports listed there. Do NOT make any changes to the settings in Control Panel> Ports. The Digi driver does not refer to these settings ( baud rate and flow control). They should be configured within your application. Do NOT add the Digi ports to Control Panel> Ports if they do not show up. If they do not display after installing the driver under Control Panel> Network, the Digi driver has not loaded properly. Check for event viewer error messages. Otherwise, remove the driver, reboot and try reinstalling.
Related Information:
http://supportold.digi.com/support/techsupport/nonunix/winnt/ntfaq.html#loaded
|
