|
"Wait Confirmation failed" in Windows 2000 Event Viewer "Wait Confirmation failed" in Windows 2000 Event Viewer
Symptom: What does the Event Viewer message "Wait Confirmation failed - check I/O port address settings" mean?
Cause:
- The I/O port address for the driver does not match the physical position of the dip switches on the adapter.
- The wrong driver has been selected.
- Another adapter is using the same I/O port address.
Solutions:
Verify that the selected I/O port address matches the dip switch settings on the adapter. Dip switch settings can be found in the manuals and install guides available on the Digi Technical Support web site.
Verify that the correct adapter has been selected during the driver installation. If you are unsure as to which Digi product you have, refer to the list of serial numbers on the Digi Technical Support web site or contact Digi Technical Support for assistance.
Verify that the adapter is using a unique I/O address. Remember to power down the system before changing dip switch settings.
Related Information:
http://supportold.digi.com/support/techsupport/nonunix/win2000/index.html
http://supportold.digi.com/support/techsupport/common/serial.html
http://ftp.digi.com/support/manuals/index.html
|
