|
How do I make an RS232 Loop Back Plug? How do I make an RS232 Loop Back Plug? Solution: Pinouts for making a RS232 Loop Back connector.
The DB-25 Loop Back connector plug consists of a female DB-25 connector wired as follows:
Pin 4 connected to pins 22 and 5 (RTS to RI and CTS)
Pin 2 connected to pin 3 (TxD to RxD)
Pin 20 connected to pins 6 and 8 (DTR to DSR and DCD)
The RJ-45 Loop Back connector consists of a single 10 pin RJ-45 plug wired as follows:
Pin 3 connected to pins 1 and 8 (RTS to RI and CTS)
Pin 5 connected to pins 6 (TxD to RxD)
Pin 9 connected to pins 2 and 10 (DTR to DSR and DCD)
The DB-9 Loop Back connector consists of a female DB-9 connector wired as follows:
Pin 8 connected to pins 7 and 9 (CTS to RTS and RI)
Pin 3 connected to pin 2 (TxD to RxD)
Pin 4 connected to pins 6 and 1 (DTR to DSR and DCD)
|
