|
Windows NT Event Log Error: The open procedure for service DigiFep5 in DLL fepctrs.dll failed. Windows NT Event Log Error: The open procedure for service DigiFep5 in DLL fepctrs.dll failed.
Symptom:
The Windows NT event viewer application reports error message: "The open procedure for
service DigiFep5 in DLL fepctrs.dll failed. Performance data for this
service will not be available. Status code returned is DWORD 0."
Cause:
This
error message will not affect the use of the Digi adapter. It is only
informing you that if you use Performance Monitor, there will be data regarding
the Digi adapter that is not available.
Solution:
You can just ignore the message and continue to use
the Digi adapter. However, to remove these error messages from being
reported, follow these steps:
- Start the registry editor by typing start
regedt32 from the command prompt.
- Select the following: HKEY_LOCAL_ MACHINE on
Local Machine, System, CurrentControlSet, Services, DigiFep5, Performance.
- Highlight the open key and press Delete.
Reboot the system and check the event viewer to verify that the error
messages do not reoccur.
CAUTION: Any mistakes made in editing the
registry may have disasterous results requiring you to boot to a different
Control Set or to reload Windows NT.
Related Information:
http://supportold.digi.com/support/techsupport/nonunix/winnt/ntfaq.html#fepctrs
|
