|
Adding Digi Device to a Laptop with no serial ports in Windows 2000. Adding Digi Device to a Laptop with no serial ports in Windows 2000.
Symptom:
Several of the new Windows 2000 laptops on the market do not
have serial ports. If you install one of Digi's network devices off of
the NIC, using a crossover cable, to give you serial ports, the Digi driver
fails to load with Code 19.
Cause:
This behavior occurs because the virtual COM port
the RealPort driver is trying to configure relies on the standard serial port driver (Serial.sys)
that is included with Windows 2000. This driver, however, can start only
if there is at least one hardware serial port that requires the driver.
Solution:
To load the Serial.sys driver go to Add/Remove
Hardware Wizard on your Windows 2000 laptop and try to manually add a com port. This com port will not
be used with the Digi, but used only to load the Serial.sys. If the com port
successfully loads, the RealPort driver should finish loading correctly and the
com ports should appear in Device Manger under Ports, with no error message.
Related Information:
http://supportold.microsoft.com/search/preview.aspx?scid=kb;en-us;Q295773
|
