|
Steps to configure auto telnet or rlogin sessions on the Portserver CM32. Steps to configure auto telnet or rlogin sessions on the Portserver CM32.
- Edit /etc/portslave/pslave.conf
s3.protocol telnet [or rlogin]
s3.host 192.168.1.0 [IP of host to connect to]
s3.socket_port 23 [23=telnet, 513=rlogin]
s3 refers to port 3, use actual port number.
- After editing pslave.conf.
signal_ras hup [Activate changes immediatly]
saveconf [Store permanently to flash]
- Configuring via the WEB UI.
Configuration -> Serial Ports -> Profile
- Protocol telnet [or rlogin]
- Host 192.168.1.0 [IP of host to connect to]
- Socket Port 23 [23=telnet, 513=rlogin]
- Submit
Administration -> Restart Processes
- digi_ras Stop Process
- digi_ras Start Process
Administration -> Load/Save Configuration
|
