|
Configuring a realport device for a Terminal with scoadmin Configuring a realport device for a Terminal with scoadmin
Use this procedure to configure a RealPort device for a terminal
in SCO UnixWare. See your operating system documentation for more
information on configuring a serial device for a terminal.
The Digi device and RealPort should be properly installed,
configured and functioning before proceeding.
Procedure
- Connect a proper cable between the port and
terminal.
- Enable and configure the port using one of the these three
methods:
|
Method
|
Description
|
|
Using pmadm
|
This method can be used in any SVR4-based Unix system.
Though effective, it is often tedious to use because the command
used is complicated. See Configuring a Device with pmadm.
|
|
Using the Serial Manager
in SCO UnixWare
|
This method works only in SCO UnixWare. See General SCO UnixWare
Device Configuration.
|
|
Using sysadm
|
This procedure works only in SVR4 systems that have access to a
utility called sysadm. See General SVR4 Device
Configuration.
|
|
