Configuring a Device with admintool

The Solaris system administration utility, admintool, can be used to configure Digi serial devices.

Note: In order to use admintool, The Digi devices need to be linked to devices in /dev/term and /dev/cua.  These links are normally created when the driver is installed.  If these links are not there they can be created manually.

Procedure

1. Access admintool through a window interface, or entering this command at a root prompt:

   admintool

2. From the admintool window, select Browse > Serial Ports.
3. Choose a device.
4. Choose Edit > Modify.
5. Configure the port as needed.