Uninstalling the Driver

Use this procedure to remove a driver from the Novell NetWare Installed Products List.

IMPORTANT: Use this full procedure only if the driver was installed from the server console. If the driver was installed from a Windows client, perform only step 6 (drivers installed from a Windows client are not registered in the Novell NetWare driver database, so steps 1-5 are unnecessary).

Procedure

To remove a driver from the Installed Products list, do the following:

1. From the Novell NetWare server console, enter the following:

   load install (Novell NetWare 4.x)
   load nwconfig (Novell NetWare 5.x)

2. Choose Product Options > View > Configure > Remove Installed Products.
3. Highlight the Digi driver to remove.
4. Press the Delete key.
5. Choose Yes when prompted to remove the driver.
6. Remove the load aiodgdm command line from the AUTOEXEC.NCF file.
   
   Note: Novell NetWare does not remove the actual driver files, just their entry into the Novell NetWare driver database. To completely delete all files, follow normal Novell NetWare procedures to delete a file.