Using the Windows Troubleshooter

Use this procedure to help resolve any basic installation or configuration problems with a Microsoft Windows 2000 or Microsoft Windows NT  adapter.

Procedure

1. From the Start menu, select Control Panel > System > Hardware > Device Manager.
2. From the displayed list, choose one of the following, according to your adapter type:
• Multi-port serial adapters (for AccelePort asynchronous serial adapters)
• Network adapters (for DataFire synchronous, DataFire RAS, or AccelePort RAS adapters)
3. Choose a Digi adapter.
4. Choose Actions > Properties > General to view the Device Status window.
5. If the Device Status window indicates that the device is not operating properly, choose Troubleshooting and follow the instructions. Use Windows Help for more information.