Creating Installation Diskettes: Windows NT and Windows 2000

Use this Windows NT procedure to create a driver diskette that is readable by a UNIX system. This procedure is valid on Windows NT and Windows 2000 systems only. If you are using Windows 3.x/95/98, use the DOS procedure.

Procedure

1. Download the utility ntrw.exe from the Digi support site.
2. Format a blank 1.44 megabyte floppy diskette for each image you wish to create.
3. Copy the downloaded diskette image file(s) and ntrw.exe into a common temporary folder.
4. From the Start menu, choose Programs > Command Prompt.
5. Change the current directory to the directory into which you copied ntrw.exe and the image files.
6. At the command prompt, enter:

   ntrw filename drive:

   where filename is the name of the diskette image file, and drive: is the diskette drive designator (typically A: or B:).

7. Repeat step 6 for each diskette you wish to create.