Uninstalling the Driver

Use this procedure to remove the Digi device driver from the kernel. The Development Kit is not required, although the link kit must be installed.

Procedure

1. Log onto the console as super-user (root), and enter this command: 

   custom

2. Choose Software > Remove from the menu that appears.
3. Choose the Digi driver.
4. When prompted to boot the new kernel by default, choose Yes for the new kernel to boot by default. Choose No if there is a specific reason for this new kernel not to boot by default.
5. Exit custom.
6. Enter the following command to shut the system down and boot the new kernel:

   shutdown -y -g0