Use the worksheet below to collect the information that may be required to complete the configuration of your DataFire PTE adapter within your operating system environment. Note that not all operating systems support all parameters.
The parameters on this page are for channelized T1 connected to a PBX or similar in-house network (Short Haul). If your adapter is connected directly to an external T1 telephone line, use the Channelized T1, Long Haul (External T1) worksheet.
| Parameter | Value |
|---|---|
| Coding | [ ] B8ZS [ ] AMI |
| Framing | [ ] ESF [ ] D4 |
| Short Haul Length (in feet) | [ ] 0-133 [ ] 133-266 [ ] 266-399 [ ] 399-533 [ ] 533-655 |
| Signaling |
[ ] Ground Start [ ] Loop Start [ ] Immediate
Start [ ] Wink Start -- Wink Digits (1-20): ________ |
| Leased Time Slots |
List which, if any, T1 time slots are leased:
|
| Modem Nationality |
Enter the country in which the PTE adapter will be installed: |