Use this topic to learn more about the Digi Port Authority - Remote (DPA - Remote) monitor.
DPA - Remote is a program to monitor data and errors on network interfaces and ports via SNMP agents over TCP/IP. A network interface to a device might be an Ethernet or PPP connection.
Monitoring a network interface can be helpful in troubleshooting network performance issues, or just keeping track of the network interface performance. DPA - Remote can monitor incoming and outgoing data and errors on a network interface.
Monitoring ports can be helpful in troubleshooting port problems. DPA - Remote can monitor incoming and outgoing data and errors on ports. Also, individual signals (such as DTR, DCD, OFC, IFC, etc.) can be monitored. By viewing port signals, a user may be able to determine if a port appears to be functioning correctly, or if it appears to be in some state of flow control or other condition of concern.
Either a mouse or keyboard can be used with the DPA - Remote interface. Where this documentation directs a user to select or choose, keyboard users are expected to use the proper keystrokes to accomplish the same task. For more information on using a keyboard, see Using the Keyboard Instead of a Mouse.
DPA - Remote supports PortServer II, Digi One RealPort, and PortServer TS 2/4 and PortServer TS 8/16 products.
Note: Depending on your model and firmware revision, the information displayed by DPA - Remote will differ.
To begin monitoring a device, see Monitoring Ports and the Network Interface.